Discussion Locked

Win 2000 PRO PC wont SHUTDOWN!?

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

HI all, i Need a fix for a Windows 2000 Pro PC that wont shutdown

When i click shutdown from start menu or ctr-alt-dlt i keep getting getting a blue screen referring to POWER_DRIVERS, etc issue.....its not the bios, ive removed just about anything that could cause this, been thru all the power settings?

I'm stumped and dont want to reinstall? Somebody PLEASE HELP!

Thanks brothers and sisters.....

6 replies

by ann777

Try working through these....

http://www.aumha.org/a/shutdown.htm

The document is geared toward win9x.... but is also applies to w2k. You just need to figure out which application is causing the problems. If I had to guess, I'd suggest looking at video, sound, or cd-rom drivers. When shutting down, these try to release resources....

Hope this helps.

by rvm-goddamn

Hi Anna,
Thanks . I thought like you did at first, then i started from scratch i went into NT Diagnostics which i have because i always put NT 4.0 Admin Tools on home and work PCs from the NT 4.0 Server Cd. I immediately saw that my IRQ 11 is being shared by 4 devices The NIC SOund card Display/Video card and the CULPRIT which is my Intel 82371 PCI to USB Universal Host Controller I m down to the machine is working like a champ except for still when i shut down it hangs and gives a Blue screen the issue at last is i have a USB hub with a keyboard and optical mouse and with just those attached all is fine it shuts down correctly, but as soon as i attach my brand new UMAx e5420 scanner either directly to an upload port on the back of the Pc or to the Hub the results are the same blue screen
Blue screen refers to disabling all "cache and shadowing settings in BIOs which ive done with no results The damn thing with 2000 is it doesnt just let you via Device Manager physically change resource settings so i can move the usb controller to another IRQ I have IRQs 1.2.5.10 and 12 free but all resouce tab settings are shaded out thanks to nt Just Peachy anyway?
SO All i need now is to find out how to move a RESOURCE in NT Pro to another IRQ, you have to forgive me as ive spent the last couple years as a Network Engineer (cisco) so ive lost or forgotten a lot of my roots(?)involving this basic PC troubleshooting stuff ? Do you need a $50 million dollar network designed andbuilt from the ground up, then im your man but this is driving me crazy SHEESH
The only thing i can think off is sharing the whole PC thru NT sharing and maybe that will unshade out the resouce tabs in device manager...but im not going to try untili get more feedback1 Anyway i have to fly out the door to Logan Airport (Boston)as i have a Job interview in Miami on Monday. Thanks ANNA!
BOB

by rvm-goddamn

Hi Anna,
Thanks . I thought like you did at first, then i started from scratch i went into NT Diagnostics which i have because i always put NT 4.0 Admin Tools on home and work PCs from the NT 4.0 Server Cd. I immediately saw that my IRQ 11 is being shared by 4 devices The NIC SOund card Display/Video card and the CULPRIT which is my Intel 82371 PCI to USB Universal Host Controller I m down to the machine is working like a champ except for still when i shut down it hangs and gives a Blue screen the issue at last is i have a USB hub with a keyboard and optical mouse and with just those attached all is fine it shuts down correctly, but as soon as i attach my brand new UMAx e5420 scanner either directly to an upload port on the back of the Pc or to the Hub the results are the same blue screen
Blue screen refers to disabling all "cache and shadowing settings in BIOs which ive done with no results The damn thing with 2000 is it doesnt just let you via Device Manager physically change resource settings so i can move the usb controller to another IRQ I have IRQs 1.2.5.10 and 12 free but all resouce tab settings are shaded out thanks to nt Just Peachy anyway?
SO All i need now is to find out how to move a RESOURCE in NT Pro to another IRQ, you have to forgive me as ive spent the last couple years as a Network Engineer (cisco) so ive lost or forgotten a lot of my roots(?)involving this basic PC troubleshooting stuff ? Do you need a $50 million dollar network designed andbuilt from the ground up, then im your man but this is driving me crazy SHEESH
The only thing i can think off is sharing the whole PC thru NT sharing and maybe that will unshade out the resouce tabs in device manager...but im not going to try untili get more feedback1 Anyway i have to fly out the door to Logan Airport (Boston)as i have a Job interview in Miami on Monday. Thanks ANNA!
BOB

by kirill lozovatsky

The Windows 2000 shutdown process involves sending messages to the installed devices, system services, and applications to notify them that Windows is preparing to shut down. The system waits for responses from open applications to make sure that they shut down properly, and save unsaved data to disk. Each running device, system service, and application usually respond to the shutdown message, indicating that it can be closed.

Typical causes for problems with Windows 2000 shutdown include:
Device drivers not responding correctly, if at all.
System services not responding or sending busy request messages to the system.
Applications not responding, particularly 16-bit Windows programs.
To resolve problems with shutdown, try the following suggestions:

Check that the system properly shuts down in Safe Mode. If so, check the boot log file. Note the services that were disabled under Safe Mode, stop them one at a time in normal mode, and then shut down to see whether the system works properly. After the problem driver or service is identified, if the file is corrupted, either reinstall it, search for an update, or uninstall it until the problem can be resolved.
Press CTRL+SHIFT+ESC to start Task Manager and see which applications are currently running. Manually quit the applications before shutting down to see whether that resolves the problem.
Check with your computer manufacturer to be sure that you have the latest BIOS update for the system.
If the problem occurs immediately after a change to the system, such as installing or upgrading applications, system services, or hardware with device drivers, undo the last change made to the system and test the system.

Hope It'll help you.

by rvm-goddamn

Kirill
Thanks, i just upgraded the bios with a new chip i went into NT Diagnostics because i always put NT 4.0 Admin Tools on PCs from NT 4.0 Server Cd. I saw that my IRQ 11 is being shared by 4 devices The NIC SOund card Display/Video card and the CULPRIT which is my Intel 82371 PCI to USB Universal Host Controller I m down to the machine is working like a champ except for still when i shut down it hangs and gives a Blue screen the issue at last is i have a USB hub with a keyboard and optical mouse and with just those attached all is fine it shuts down correctly, but as soon as i attach my brand new UMAx e5420 scanner either directly to an upload port on the back of the Pc or to the Hub the results are the same blue screen
Blue screen refers to disabling all "cache and shadowing settings in BIOs which ive done with no results The damn thing with 2000 is it doesnt just let you via Device Manager physically change resource settings so i can move the usb controller to another IRQ I have IRQs 1.2.5.10 and 12 free but all resouce tab settings are shaded out thanks to nt Just Peachy anyway?
SO All i need now is to find out how to move a RESOURCE in NT Pro to another IRQ, you have to forgive me as ive spent the last couple years as a Network Engineer (cisco) so ive lost or forgotten a lot of my roots(?)involving this basic PC troubleshooting stuff ? Do you need a $50 million dollar network designed and built from the ground up, then im your man but this is driving me crazy SHEESH
The only thing i can think off is sharing the whole PC thru NT sharing and maybe that will unshade out the resouce tabs in device manager...but im not going to try until i get more feedback1 Anyway i have to fly out the door to Logan Airport (Boston)as i have a Job interview in Miami on Monday. Thanks ANNA!
BOB

by rvm-goddamn

Kirill
Thanks, i just upgraded the bios with a new chip i went into NT Diagnostics because i always put NT 4.0 Admin Tools on PCs from NT 4.0 Server Cd. I saw that my IRQ 11 is being shared by 4 devices The NIC SOund card Display/Video card and the CULPRIT which is my Intel 82371 PCI to USB Universal Host Controller I m down to the machine is working like a champ except for still when i shut down it hangs and gives a Blue screen the issue at last is i have a USB hub with a keyboard and optical mouse and with just those attached all is fine it shuts down correctly, but as soon as i attach my brand new UMAx e5420 scanner either directly to an upload port on the back of the Pc or to the Hub the results are the same blue screen
Blue screen refers to disabling all "cache and shadowing settings in BIOs which ive done with no results The damn thing with 2000 is it doesnt just let you via Device Manager physically change resource settings so i can move the usb controller to another IRQ I have IRQs 1.2.5.10 and 12 free but all resouce tab settings are shaded out thanks to nt Just Peachy anyway?
SO All i need now is to find out how to move a RESOURCE in NT Pro to another IRQ, you have to forgive me as ive spent the last couple years as a Network Engineer (cisco) so ive lost or forgotten a lot of my roots(?)involving this basic PC troubleshooting stuff ? Do you need a $50 million dollar network designed and built from the ground up, then im your man but this is driving me crazy SHEESH
The only thing i can think off is sharing the whole PC thru NT sharing and maybe that will unshade out the resouce tabs in device manager...but im not going to try until i get more feedback1 Anyway i have to fly out the door to Logan Airport (Boston)as i have a Job interview in Miami on Monday. Thanks Kirill
BOB

This discussion is closed to new replies.