Question Locked

Win XP boot.ini file

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Below is the boot.ini file of my computer. I have two hard drives installed : 1..C: & E: and the 2: is D:.
The first drive has two partitions. I intend to install WinXP again in D:

When I use the the WinXP install CD is does not show the other partitions.
Can someone please repair my boot.ini to reflect my system.

Thanks.....viv

[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect

5 replies

by hashmi.sa

As far as i know boot.ini has nothing to do with winxp cd not detecting ur other partition.

by willcomp

Disconnect drive with C and E partitions. Then you should be able to install on other drive provided it has a primary partition.

When other drive is reconnected, you will have 2 bootable disks and that may present problems. You cannot "dual boot" the same OS, one will be selected by BIOS and it may not be the one you desire.

by beitpatr

[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional (Drive C)" /noexecute=optin /fastdetect
multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP Professional (Drive E)" /noexecute=optin /fastdetect
multi(0)disk(1)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional (Drive D)" /noexecute=optin /fastdetect

I'm not positive with the 3rd entry because I don't have a second harddrive, but that's my best guess. If you want to call them something else, just change the name within the quotation marks. At startup you can choose which Windows XP you want to boot too on the associated drive and partition.

This discussion is closed to new replies.