11 replies
by ebayva Accepted solution
by seanferd Accepted solution
http://www.dban.org/
That should wipe everything.
Then you can create new partitions, format, and install.
You might also consider scanning the drive with the vendors HDD testing utilities.
by robo_dev Accepted solution
by ebayva Accepted solution
by robo_dev Accepted solution
by ebayva Accepted solution
by robo_dev Accepted solution
by kevinotakos Accepted solution
First of all check if it is the correct paartition and if it is and refuses to delete then do this. Create an MS DOS start up disk , boot from floppy then try to format the partion using MS DOS COMMAND
FORMAT C: then press enter this should work if it doesnt contact me through kevinotakos@yahoo.com
by ebayva Accepted solution
by rob miners Accepted solution
you can use DiskPart to remove and recreate the Partition. Or if it is only a Recovery CD set the Windows Vista Recovery CD can be used to Boot your PC to enable you to create a Primary Partition and set it active.
Creating a Windows Vista Recovery CD
http://blogs.techrepublic.com.com/window-on-windows/?p=622
Download from here:
http://coblitz.codeen.org/neosmart.net/downloads/guides/Vista_Repair/Vista_Recovery_Disc_x86.iso
Burn it to a CD with Nero or equivalent software.
Boot from the CD and on the first screen click Next, click Repair your computer, click Next and select Command Prompt.
A Description of the Diskpart Command-Line Utility
http://support.microsoft.com/kb/300415
Edit: missed a bit
by rob miners Accepted solution
You can use the Hard Drive Makers Testing Utility to Test the Drive which can be downloaded from below.
Hitachi / IBM
Western Digital
Fujitsu
Seagate
Samsung
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending