Question Locked

Win XP server connection issue

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am having a strange problem where I am logged into my profile on 2003 server from Xp but I need the machine to be logged in all the time. Whenever the machine is left inactive for a period of time, e.g. overnight, I loose connection to the server.

When I return to the machine, it is still logged in but there is a popup asking for the administrator password. I enter this but it does nothing and I cannot access anything on the server. The only way around this is to reboot.

Can anyone advise what this problem is and how I can get round it. (I have already disabled all group policy & power management settings/screensavers etc but it still looses connection).

5 replies

by ugadata

Check the properties for the network card under Device Manager. There is most likely a Power Management tab, be sure the the check box for "Allow the computer to turn off this device to save power" is not checked.

A less then desirable option would be to start a command prompt and do a continuous ping to the server or some other IP address on your network (ping xxx.xxx.xxx.xxx /t) but if it works and solves the problem ......

by alphatech9

It sounds like the Server is configured with a timeout on the access token.

If it works after reboot, then the DNS is confirming the ACL is OK, but when it sits it is somehow getting logged off.

I would look in the password policies to see if there is a limited amount of time that an account can remain inactive before the server cuts it off...

by lee

Thanks for the replies, I have already checked the network card properties and that is not the problem.

I havent checked any password policies yet but if this is the problem, where can i find and edit these, is it done through group policy mangement? If this is the case, I have looked in there already and cant find any policies setup relating to this so maybe it could be something else?

by lee

I've disabled all the password policies and its made no difference so has anyone got any other ideas as to what could be causing this problem?

This discussion is closed to new replies.