Discussion Locked

win2000 inaccessible boot device

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

pls help!
i need urgently your answer.
my win2000 server has blue screen (stop:0x0000007b, inaccessible boot device) that comes out after the usual startup win2000 windows, the hdd is dynamic type, i tried all ways, check the disk controller, scan for virus etc but still inaccessible boot device, i check it on a different running win2000pro, check it on disk managment and its healthy system, what could be the problem? aside from formatting and reinstalling? i have lots of data in there. thanks for your feedback.

5 replies

by hal 9000

Have you tried attempting to start the computer with another HDD in it and the install CD?

It's possible that the HDD controller is faulty or the MRR's on your HDD are damaged and preventing it from being mounted and used as a valid Boot Device.

If the data is that important and you have no current backup you can always read the data off that HDD in another computer with that drive fitted to a USB Caddy and set to Cable Select. You may have to take ownership of the files so follow the directions here

http://tinyurl.com/3aw7

If the files are encrypted you can recover your encryption keys by following the directions here

http://tinyurl.com/orpmf

Amd if necessary you can follow the directions here to perform an In-place Install though I would make certain that you have everything backed up prior to starting particularly any [b]Encryption Keys[/b] that may be involved

http://tinyurl.com/g4bv8

Col

by sgt_shultz

mmm. can you use dynamic disk for the boot disk? i thought it had to be basic. you didn't convert it did you? you can always add in a second hd with a 'rescue' win2k install to get at your data and perhaps repair it.
does this system boot and read the hard disk fine if you boot using your win2k install cd? is this system badly fragmented? you can use the recovery console to defrag

by reynaldolim

thanks! i already check the disk controller and think its not the problem, i did backup now the data, will formatting the hdd solve the problem and reinstall again the os, i guess this is the last resort!

yup, i can boot from dynamic, i install the os first on a basic disk then convert to dynamic because i would like to create a mirror set but after restart, this had happen, although i was able to run the hdd on dynamic disk.

This discussion is closed to new replies.