Question Locked

Win2000 server to win2003 r2 server vpn

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have 2 servers, The first is an '03 r2 server which is the VPN host and primary domain controller on our network.

The other is an older '00 server located at a remote site.

All have the latest updates and service packs.

I can successfully establish a VPN connection using the the "new connection" process, pptp, it works flawlessly.

All our remote workstations work fine using the same setup.

I configured RRAS in '00 to connect the VPN when the server starts. (PPTP, demand dial, etc.) It fails to start on boot, I get an error in the log that says it was unable to agree on a PPP control protocol. This always happens. I connect manually from inside rras and it connects fine.

The second issue is; once connected, the remote server does not appear on the network. I can ping both sides from each other, but not any of the other workstations/servers on the network. I need to have the server registered on the network...

Again, the "dial up" vpn (not RRAS) works fine.

I need to have the vpn up 24/7, whether someone is logged in or not.

What could I have missed?

1 reply

This discussion is closed to new replies.