Question Locked

Win2K3 Server invisible on network after starting RRAS

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I started Remote Access on my Win 2003 server, and it has made the server invisible on the network. I disabled RRAS but it has not fixed the problem - the server sees only itself on the local network, and none of the workstations in the workgroup can see the server.

I have found several instances of this question being asked but no truly helpful replies. I don't care about successfully setting up RRAS at this time; I simply want to get my original settings back so that the server is again visible and functioning.

I am moderately experienced but this problem has sailed into deeper waters than I know. I would appreciate a walkthrough for restoring my network, sharing, AD etc. settings to what they were before RRAS erased them.

Thanks!

3 replies

by online

By laboriously working through the possibilities, I found the problem.

Apparently, activating RRAS in an attempt to get Remote Access working caused NetBIOS to be disabled. How very clever and helpful of the MS boys.

To fix the problem, go into the TCP/IP configuration panel for the affected network connection, click Advanced, and under the WINS tab make sure that NetBIOS is not disabled. I selected the Default option since I've never modified the network basics, but some users might select the Enable setting instead.

Posting this self-reply to get the answer into the slipstream, where I hope it's of use to others bitten by this stupid "feature."

by tbwampler

THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I finally typed in the right terms in my google search to find your post after a week of head-banging!

This discussion is closed to new replies.