8 replies
by tech_wiz03
Your windows98 emergency disk if undamaged should always be able to boot the system. The boot disk is basically just a dos structure with generic cdrom support.
1) Check your Bios and make sure you have boot from floppy active as first option, then cdrom support second and finally your harddisk.
2) If this gets you to operational state your away, if not try and find a friend that has a windows98 emergency disk. Last option is to obtain a boot disk for www.bootdisk.com .
**If all this fails, you may just have to restore your system through a complete format and re-install.
regards
rick
Poster rated this answer.
by sue t
Poster rated this answer.
by thechas
Was either drive set up with the floppy disk utility provided by the drive manufacture?
If so, you cannot simply swap the drives around as the utility needs to be on the boot sector of the master drive on IDE 0.
I wonder if your emergency disk is an actual boot disk.
What you need is a W98 startup disk.
You can create 1 on ANY running W98 PC from the add/remove programs menu.
Or, you can download a boot disk from www.bootdisk.com
or www.madboot.com
Chas
Poster rated this answer.
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending