Discussion Locked

win98ME prompts for normal/safe mode.

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My newly installed windowsME, instead of booting directly, put up a screen asking normal, safe mode, .... screen. There does not seem to be any problem othewise in the working.

Please advise

12 replies

by dmiles

May be a bug in that their is a corrupt file or conflict in the hardware,boot into safe mode and check device manager to see if their are any conflicts.
Secondly if their are none boot into safe mode and select the step by step configuration and when screen comes up type (Y) for each line and reboot

by cp409sd

Take a look at your msdos.sys file, located in c:\ of your drive. It should look something like this:

[Options]
BootDelay=0
BootMulti=0
BootGUI=1
DoubleBuffer=1
AutoScan=1
WinVer=4.10.2222
DblSpace=0
DrvSpace=0
Logo=0

If your 'BootDelay' is set to anything other than zero, change it.

by sureshvarma

The answer seems logical. However in this version this option is not available. I tried after inserting it but it didnot work. Following is the text of MSDOS.sys

[Paths]
WinDir=C:\WINDOWS
WinBootDir=C:\WINDOWS
HostWinBootDrv=C
UninstallDir=C:
[Options]
BootMulti=1
BootGUI=1
AutoScan=1
WinVer=4.90.3000
;
;The following lines are required for compatibility with other programs.
;Do not remove them (MSDOS.SYS needs to be >1024 bytes).
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxa
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxb
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxc
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxd
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxe
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxf
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxg
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxh
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxi
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxj
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxk
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxl
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxm
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxn
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxo
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxp
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxq
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxr
;xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxs
BootMenu=1

by itsupport

the BootMulti=1 lien should read Bootmulti=0. This tells it that you don't want to have a dual boot system, which may help.

by wired_777

Check MSCONFIG. It has an option to display the boot menu on startup.

Go to start|run
Type MSCONFIG
Make sure the selection is on "normal startup"
hit the "advanced" button.
Remove the check mark from "enable startup menu"

by wired_777

just noticed! The very last line of your MSDOS.SYS file
BOOTMENU=1
Change that to BOOTMENU=0

by baziite

I assume that you can continue booting windows after you sellect Normal or safe from the startup menu . Sellect Normal and boot to windows . Go to accessories / system tools / System information . On the tools menu select system configuration .Pressthe Advanced Tab at bottom left .Uncheck the "enable startup menu" press OK or Apply until you exit the utility . Now restart . You have done it .......

This discussion is closed to new replies.