Discussion Locked

Windows 2000 - Printing across a WAN?

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am running Windows 2000 server and Windows 2000 Pro Clients on 2 LANS. I would like to send Arcview plots from a client machine on one LAN to a plotter (HP Designjet 750Cplus) on the other LAN. We have a T-1 connection on both ends.
Currently, it is hit or miss when I send a plot (mostly miss). Arcviews plotting isn't the fastest - even on a LAN. Any recommendations?

6 replies

by joseph moore

Sounds like a bandwidth-network connectivity issue to me. Does the traffic run through a firewall somewhere, so you can look at the firewall logs to see if the packets are making it there and back?
Or maybe across a switch you can run a sniffer on a span port on to see the packets?
Basically, I would start with Layer 2 & 3 troubleshooting on this one.

by pgm554

You may need to set up IPP printing.Depending on the printer and print server you may or may not have this as a supported printing option.

IPP(internet printing protocol) printing is different from the traditional que in that it can deal with latency problems of slow or intermittent WAN links.

Otherwise, you may have to tweak the timeout functions of the plotter and print que.

by pgm554

To change the parallel port timeout settings

Open Printers
Right-click the printer you want to change, and then click Properties.
On the Ports tab, click the LPT port that the printer uses, and then click Configure Port.
Type the new numberfor the timeout setting in Transmission Retry.
Note

To change device settings, you must have the Manage Printers permission. For information about printing security permissions, see Related Topics.
To open Printers, click Start, point to Settings, and then click Printers.
If you are printing to a pen plotter, you might need to increase the port timeout setting to allow more time for the plotter to clear its buffer.
If you print to more than one parallel port, change Transmission Retry for each port.

This discussion is closed to new replies.