Windows Forum

Ask something
Discussion Locked

windows 2000 SCSI Card Problem.

0 helpful
1 reply

by ypk1975

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Server name.....................shankertradingc
ServeRAID Manager agent.........5.11.05
ServeRAID Manager console.......5.11.05
Number of controllers...........1
Operating system................Windows 2000

Information for controller 1
-------------------------------------------------------
Controller type.................ServeRAID-4Lx
BIOS version....................4.70.17
Firmware version................4.70.17
Device driver version...........4.70.17
Physical slot...................2

i have got above said scsi Card in which i have 5 HDD and in the slot one i have 3 hard in which Oracle is loaded . the Slot one hard disk give me the following error

10f00000:Defunct drive (FRU Part # Not available) - SCSI error on controller 1, channel 1, SCSI ID 1.

this happen two time and i have changed the hard disk twice .

Pls some one advice what is problem and why it happen twice .

1 reply

by hal 9000

It sounds as if you either have 2 SCSI drives on the same channel with the same address or a faulty lead.

If it's one of the 68 Pin D type connectors look at the plug on the HDD that you have replaced and make sure that one of the pins isn't bent and not making contact. These SCSI cables are fragile and easy to break.

Col

This discussion is closed to new replies.