Question Locked

Windows 2000 Server VPN only accepting Local connections through WAN

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Call me a nube, but I'm having issues with good old W2K and Remote Access.

My setup: NT4 Domain, no active directory, W2K Server box on Domain acting as Remote Access server. Two adapters in the RAS, one WAN and one LAN.

Goal: Access the local network through a VPN connection on the RAS server, via an external IP - 216.###.###.###

I've setup the RAS server and I know its active because I can connect to the VPN from other machines on the local network, using the external address.
However, when I attempt to connect to the VPN by a dial up connection, through the external address, I do not resolve a connection, and it does not get to the point of authenticating.
It seems to me that there is a problem with requests coming from outside our network, which are not being accepted, while request from a local address are being accepted. I do not believe that this is a firewall issue because my WAN connection is a static IP outside of the firewall.

I think I'm just missing one small setting or security configuration, but I'm stuck as to what might be missing or incorrect.

This may help: it's the last two lines of my RRAS log after I successfully connected from a local system.

216.223.###.##7,MULTIMEDIA\jgolding,04/24/2007,17:09:23,RAS,VPN,6,2,7,1,5,5,61,5,64,1,65,1,31,216.223.###.##8,66,216.223.###.##8,25,311 1 192.168.1.9 04/24/2007 20:31:40 2,44,42,8,192.168.1.43,12,1500,50,3,51,1,55,1177448963,45,3,40,1,4108,216.223.###.##7,0,,4147,311,4148,MSRASV5.00,4120,0x004D554C54494D45444941,4294967206,8,4136,4,4142,0

216.223.###.##7,MULTIMEDIA\jgolding,04/24/2007,17:09:31,RAS,VPN,6,2,7,1,5,5,61,5,64,1,65,1,31,216.223.###.##8,66,216.223.###.##8,25,311 1 192.168.1.9 04/24/2007 20:31:40 2,44,42,8,192.168.1.43,12,1500,50,3,51,1,55,1177448969,45,3,46,7,43,429,42,101598,48,19,47,224,49,6,40,2,4108,216.223.###.##7,0,,4147,311,4148,MSRASV5.00,4120,0x004D554C54494D45444941,4294967206,8,4136,4,4142,0

I'm aware of 3 addresses: 192.168.1.9 (LAN), and 216.223.###.##7 (WAN). 216.223.###.##8 is the external address for my networks connection. I don't know where the 192.168.1.43 address came from, or how it is used.

3 replies

by cg it

then the firewall is probably responsible.

by goldija

Thanks for the reply.
The problem wasn't firewall related, though there was a routing problem. I've recreated the VPN server configuration and it seems to be working now ... to a point.

From the client, I can now login and authenticate, and I am provided an IP address in the correct subnet, but I cannot browse the network at all. I am not worried about NETBIOS names at this point, but even just addressing the IPs is not resolving.
I believe I have to specify routes that are allowed, or should my Windows Server Authentication take over and play its role governing the clients connecting to the VPN.

Just a reminder. I'm on an NT4 Domain using a Windows 2000 server box as the VPN server, with a trust relationship between the W2K server and the PDC.

This discussion is closed to new replies.