Question Locked

Windows 2003 Server SP2 WAN NIC stops passing DNS until reset

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Problem: clients on LAN can not do DNS resolution several times a day. Bounce WAN NIC card on Windows 2003 server and clients can DNS resolve again.
Windows Server is doing DHCP, DNS, IP Routing, NAT/Firewall on server.
DNS and DHCP(DNS setting) are set to internal IP address of server, 192.168.0.1

WAN NIC is connected to QWEST DSL modem.

Clients can ping out to WAN using IP addresses but can not resolve Domain Names so NIC is not really down, just stops routing DNS.
DNS is set to have local LAN server be the DNS server but does have WAN FORWARDERS configured.

I am stumped. I think its something to do with the IP Routing, NAT or even something like ARP dynamic vs static, but can't pin it down.

Thanks,
Steve

2 replies

by lloydz1

I upgraded My small buisness server to SP2 and all of a sudden the clients are no longer resolving DNS and i don't know why
I have a 2003 SBS with 1 NIC plugged into a pix 501 then everything else connected via switch. the SBS is configured as the DHCP but the NAT/Firewall is configured on the pix

I too am stumped

Thanks
Lloyd

This discussion is closed to new replies.