Question Locked

Windows 2003 Standard server reboots with 4GB RAM

0 helpful
18 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi

I have a Windows Server 2003 Standard Edition server which runs perfectly with 2GB of ram.

I need to upgrade it to 4GB as users are complaining that it is getting slower (Its a terminal server)

When I add an addition 2 x 1 GB DIMMS(identical to the original 2 right down to the batch number ....)the bios recognizes the 4GB but Windows gets as far as the splash screen and then the server reboots.

I've tried replacing the motherboard ( Intel S5000PSL) and the memory but I get the same result.

Any ideas?

Antony

18 replies

by oh smeg

It could be plain Faulty RAM or it may be a Timing Issue. You can test the RAM with a RAM Testing Utility like Mem Test or there are several on the Ultimate Boot CD available to download here

http://www.ultimatebootcd.com/download.html

I would first test the original Sticks and then remove them and test the new RAM Also check the Brand of RAM you are using here against the Tested RAM that Intel claims are compatible with this M'Board here

http://www.intel.com./support/motherboards/server/s5000psl/sb/CS-022924.htm

I do not know this particular M'Board but some do not like to have all the RAM Sockets filled with the slower cheaper RAM types so you need to up the size of the RAM to 2 GIG Capacity by 2 Sticks to achieve the 4 GIG of RAM on some systems. This allows you to have the amount of RAM that you want and still have free Ram Slots available.

The other alternative is to fit faster RAM to the M'Board and use the smaller Sticks they both work out at about the same price and if you need to increase the amount of RAM that the M'Board is caring you will need to replace it all at the same time.

Col

by ajpsa

Hi Col

Thanks for your speedy response.

I also thought that initially. I managed to get 4 DIMMS from the same batch. They all test fine with Mem Test.

Going to try your suggestion and get 2 x 2GB DIMMS and see if this works.

Thanks again

Antony

by oh smeg

Glad I could be of some assistance.

Col

by ajpsa

Tried 2 x 2GB DIMMS instead of 4 x 1 GB DIMMS .... still no joy.

Stayed on the splash screen for a bit longer before restarting but thats all.

Booting in safe mode it freezes on acpitabl.dat

Any one??

by oh smeg

in 8 RAM Slots it should be able to carry 4 GIG Ram Chips.

If it's not working with 2 X 2 or 4 X 1 GIG RAM the only thing it can be is that you are using unsupported RAM so try looking at the Supported RAM List here in a PDF Format File.

http://download.intel.com/support/motherboards/server/s5000psl/sb/s5000psl_memlist_rev_41.pdf

You may also be required to update the BIOS to the newest available which is located here

http://tinyurl.com/5jpg7r

It really sounds as if the RAM in use here is unsuitable for this M'Board.

Col

by raywu168

I have the same problem, Windows 2003 and 2008 was rebooting after memory upgrade. Boot up with SUSE Live CD, it works fine. After I disabled "4GB remapping" in BIOS, the system has 3GB usable memory, Windows 2003 and 2008 boot up normal. I am using Asus motherboard. Anybody know a solution?Thanks.

by balge

hi
sorry not sure what your problem is?
it didn't boot but now it does?
you fitted 4GB and it only shows 3GB? - thats because the system uses some for addressing etc. quite normal
or am I being thick...
cheers!

by raywu168

Sorry, I did not make it clear. I have 4 x 1GB memory installed, I have to change the BIOS to force the motherboard to have 3GB usable memory for Windows 2003 or 2008 to boot up. My goal is use 4GB in Windows 2003 or Windows 2008 instead of 3037MB.

by balge

.. the system uses some address space, Windows doesn't show this as available to Windows..hence 4GB installed will always show as less in Windows
32bit is 4GB - or is this 64bit OS...
cheers

by oh smeg

The only what that this is possible is to use a 64 Bit OS. There is no 32 Bit OS that can use or show 4 GIG of RAM.

This is a issue with every 32 Bit OS it simply [b]Can Not[/b] Map more than about 3.25 GIG. That means every 32 Bit version of Windows, Unix, Linux and so on.

If you sole goal is to have 4 GIG of RAM Showing in Windows you need to have a 64 Bit OS in use there is no other way to achieve this. ;)

Col

by balge

you say you have 4GB installed right?
Windows shows three and a bit - the system still uses memory for addresses etc. - whether you run 32-bit or 64-bit OS on the machine.
Try putting more RAM in and see if it can take it...
cheers
edited to add -http://support.microsoft.com/kb/929605

by oh smeg

The RAM is being used no matter what Windows Tells you is happening.

If ti isn't showing 4 GIG present this is a Coding Error within Windows but it is actually using all of the installed RAM if the RAM isn't faulty. ;)

Also you'll need to install Faster RAM in all 4 Sockets if you want to keep the unit working when you add the extra RAM. But in reality it is just cheaper to buy 2 X 2 GIG RAM Sticks than to remove the existing 2 GIG and fit 4 X 1 Gig of the faster RAM.

Col

by raywu168

First of all, thanks for reply my message so quickly. I totally agree this is a windows coding or compatibility problem between my motherboard and Windows 2003/2008 64-bit standard edition. I may just have to waiting for next release of Windows or choose other OS.

As I said on my previous post, I have to disable my motherboard's "4GB remapping" setting to get Windows to boot up, BIOS boot up screen shows "3GB usable (installed 4GB)", I know Windows will get 3GB memory only. Control Panel -> System shows I have a 4GB machine, but the task manager shows I have 3GB.

I knows people installed 2x2GB memory, reinstall OS with Vista 64-bit and still had the same problem, and they are using different kind of motherboard than me.

I did memory upgrade from 2GB to 4GB on a few Dell PowerEdge 1750 and 6650 with Windows 2008, all of them works fine. That is why I say it is a compatibility problem between Windows and my motherboard.

by oh smeg

Not the Windows Reported RAM Installed.

[i]BIOS boot up screen shows "3GB usable (installed 4GB)"[/i]

If the BIOS is not reporting 4 GIG there is a Issue there at the Hardware Level so the RAM is either incompatible with that Particular M'Board or is Faulty and some of it at least is not working or has failed. Or what is more likely here is that the M'Boards BIOS doesn't support this RAM Load.

I'm using a Gigabyte GA EP45 DS3L M'Board loaded with 16 GIG of RAM with XP 64 Bit and don't have an issue with the reported RAM in either Windows or BIOS. So I would be looking at the Hardware involved here and see what if anything can be done to get it to work correctly.

Col

by balge

hi
so did you read the link I posted?
If your motherboard is not capable of handling the RAM you aren't going to make it compatible just by wanting
buy another motherboard and this time check the spec before you buy it

by raywu168

When I enable the "4GB remapping" setting in BIOS, BIOS boot up screen shows "4GB installed" and SUSE boot up fine and report 4GB memory in OS, that tells me the memory is good.

This discussion is closed to new replies.