Discussion Locked

Windows 98 freezes shortly after boot

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a Dell Dimension L933r pc running windows 98. The system boots and then freezes shortly after it boots. It does not freeze in safe mode.Other times the video goes black and I need to reboot. The pc stays on while the video is out and the light on the monitor stays green. It also will not freeze if I let it sit at the windows log on screen. I have run anti virus on pc. The video is onboard and I did not find a way to disable it in bios, just lets me select onboard or pci. I have removed the cards and swapped memory with known good new stick still locks.

12 replies

by lizzy

First, by being able to pick the video as onboard (the integrated video adapter on the MB) or PCI (adapter in a PCI slot), it's letting you disable the onboard video this way when you choose a PCI adapter that you wish to install (looks like no AGP and no ISA video adapter capabilities). If you want to try a PCI video adapter in the PC, choose that setting in the BIOS and re-boot with the PCI card inserted and connected to the monitor.
Make sure that the drivers are installed correctly and areup to date (you need to be able to get more than 16 colors--not in Safe Mode though--that's always 16 colors\VGA).

I don't think Windows would start at all if the memory were no good, but what I would try instead is this PC's memory in a known good system.

Next, if RAM is OK and video adapter is being sought by the system, would be to start in Safe Mode. Go to Start, Run, and type MSCONFIG. Check what is on the last tab for start up items. Some need to be there, but others do not. Make sure that you turn off only one thing, reboot, see if problem still exists. If the problem is resolved, you've found the culprit. If not, reboot to Safe Mode, run MSCONFIG again, re-enable what you disabled and try something else.

Check this site for Start up list programs and msconfig help:

http://www.modempool.com/loosecruise/msconfighelp.html

(remove spaces from the URL)
HTH
Please post comments with further information if this did not solve your problem.

by casemaker

Thank You, These actions did not resolve the issue. i restored the hard drive.However, i did learn some new troubl shooting ideas and will award the points to all of you.
Thanks

by lizzy

I re-read your question and saw you said that it "will not freeze if I let it sit at the windows log on screen." This points to a program wanting to run shortly after logging on to Windows\Network and would definitely require a look into what is trying to load.

If MSCONFIG doesn't show you anything, you may want to check the RUN statements in the Registry if you're comfortable working in there.

by lizzy

Are the memory pieces and the video card seated securely? Check to see what motherboard and BIOS you have. MB is printed on the board and BIOS comes up at very beginning of boot--you sometimes have to restart a couple of times until you catch all of it. Check the BIOS at this site for BIOS beep error codes:

http://sysopt.earthweb.com/biosbmc.html

(remove spaces from the pasted URL)

by casemaker

Thank You, These actions did not resolve the issue. i restored the hard drive.However, i did learn some new troubl shooting ideas and will award the points to all of you.
Thanks

by casemaker

When I stop the start items and reboot it still locks. When I go into bios and select pci and install pci it locks while booting. Only half of the mouse pointer and hour glass are showing.

by casemaker

After I put the pci card in and booted, I got four beeps. 1 long and 3 short.FYI. When I rebooted it boots to a black screen

by henryreed

click on start than run enter msconfig click on ok than
slect diags startup and click on ok system restarts in normal mode some strange program is causing lockup
find the program and uninstall or fix the program

by casemaker

Thank You, These actions did not resolve the issue. i restored the hard drive.However, i did learn some new troubl shooting ideas and will award the points to all of you.
Thanks

by rcom

When you select PCI video in the BOIS that is disabling the onboard adapter.

What is the latest changes or additions to the PC? Any recent software/hardware installed, updates etc.? Anything uninstalled? Any files or folders deleted?

To eleminate the video as a source without uninstalling the driver. Run MSCONFIG select the System.ini tab from the top and open the BOOT section go down to the line that reads Display.drv=pnpdrvr.drv and edit it to read Display.drv=vga.drv. This will changethe display to 16 colors just like booting to safe mode. if the PC boots all the way like this it may be bad video drivers. If it still won't boot you can go back and undo the changes and the video will be back to original.

When you run MSCONFIGas mentioned it's less confusing to uncheck everything except systray and then add items one a time until the problem occurs.

by casemaker

Thank You, These actions did not resolve the issue. i restored the hard drive.However, i did learn some new troubl shooting ideas and will award the points to all of you.
Thanks

This discussion is closed to new replies.