Discussion Locked
0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a computer that I built that was working fine and I put a hard drive that has an old Linux OS on it in and put in my Windows XP Pro cd and when I boot to it it says "Setup is searching for hardware configuration...", and then the screen goes blank and nothing happens. Please let me know what is going on and how to fix it.
2 replies
by 3xp3rt
First you must delete the Linux partitions.
For thisw boot with Linux install CD and delete all the partitions. After you can boot from Windows CD and you can install it.
by hal 9000
Or if you have a Floppy you can boot from a Win 95 - 98 Floppy and delete the Non DOS partitions in FDISK .
What is happening here is that the Installer is looking for a blank HDD to install Windows to and because it has a unrecognized partition or in this case several partitions in the NFS format Windows is unable to read or erase this type of partition.
Col
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending
1 helpful
17 replies
0 helpful
5 replies
0 helpful
12 replies
0 helpful
2 replies
Question
Is WSL still relevant in 2026?
0 helpful
1 reply