Discussion Locked

Windows cannot access the specified device, path or file.

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
On Tue. 8/14/07, my Windows XP automatically updated itself when I shut it dow for the night. The next morning, everything that I tried resulted in the message: "Windows cannot access the specified device, path or file..." Using System Restore, I backed out the change. Since that time, I have had the update applied 2 more times, with the same result. I have turned off updates. The system runs fine, as long as I don't let this update occur.

12 replies

by p33d33

Try downloading and applying the update again. If the problem occurs again, I would do a bit of research about the particular update you are trying to apply and see if other people have the same problem or it's just you? Also check if there there are specific Hardware requirements or any pre-requisites, such as another update file to be installed first?

If you still find you are the only person who seems to be experiencing the problem, your computer may have an underlying issue such as a faulty HDD or RAM.

by williamhbrown

Thanks for your input. There is a very long story here. The end is it appears that Windows Update applied patches for X-64 to my X-32 Pentium. I've installed a trial of MS Live OneSomething, and things are working so far. So I think I'm past this annoying sequence of events! Atleast one update has been applied, and my system still works!

G'Day Mate!

by b.groves

I applied 11 updates and the same issue appears. I go back to restore point be 8/15/2007 and I am back in working mode. I gues I will have to read the info for each update. If I see X64 mentioned, I'll exclude it.

by b.groves

After a painful series of updates and System Restores, I believe that the bad update that is causing this problem is KB938828. I removed it and things returned to normal. I applied a series of updates not including KB938828 and all is well so far. I hate to see this. I've never had a KB update break things this bad on standard hardware with WXP SP2.

by bdiemert

Solved the problem by deleting it, but are some other settings changed that have to be recondfigured?

by williamhbrown

I installed a 90 day trial of MS Live OneCare, and that fixed my problem. It did not install whatever was causing my problem. see:
http://www.microsoft.com/products/info/product.aspx?view=22&pcid=c9c7dd57-636f-4820-9105-f6a5a0131859&type=ovr
I was using using PC-cillin, and frankly, it cut my performance in half! I had to remove that. Live OneCare performs better. It appeared to me that Update was installing a patch intended for x-64 machines on my x-32 Pentium.
I am an old tired software developer. I worked on VMS in 1976-79. I really don't like messing with Windows, I just want to use it! Don't i wish!

by williamhbrown

This is not the fix. The problem was with EVERY executable, no matter what! The virus program got started, and if I right-click start, and selected Explore, I could get the Explorer to run. NOTHING ELSE!

by b.groves

Boot in Safe Mode. Control Panel. Add-Remove Programs. Check the box at top, Show Updates. Remove KB938828. Reboot.
If that Update shows back up in Auto Updates, uncheck it. Tell auto update not to present KB938828 again.
Good Luck,
B

This discussion is closed to new replies.