from www.lanarchitect.net article:
"When you created the scopes, you had to define the separate IP ranges of all the corresponding scopes it should operate in. That alone is enough configuration to match up the scopes with the subnets they will serve. When the DHCP server receives the DHCP forwarded request from the DHCP relay agent (or IP Helper), it simply examines the source IP of the DHCP relay agent that forwarded the request, then matches it up to the scope that serves the subnet of the DHCP relay agent and grants an IP-configuration-set back to the relay agent. Then that IP-configuration-set is passed on by the DHCP relay agent to the original client that made the DHCP request in the first place."
Right, going back to basics, the physical lan socket is going to define [*] the VLAN {because the switch port physically defines it - maybe by MAC-VMPS and implied "just one MAC at a time" usage}
The VLAN constrains the ip address subnet and Helper redirector. This Helper redirector* tells DHCP server which subnet and scope to use.
* Further Clarification to do:
1. so multiple ip address on single mac-card is outlawed or just won't work with VLANs [I overload all the time at home to avoid turning on my servers/routers ]
2. I had assumed the possibility of a chain of DHCP server redirectors. Still OK if only the first in the chain slams in its subnet and that is what the DHCP server uses to pick scopes.