Question Locked

Windows Installation interrupted by power failure ... won't boot!

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I was in the process in reinstalling Vista Personal into an Acer Inspire laptop when it was interrupted by a momentary power failure that was enough to abort the installation. The installation was largely complete: English and the time zone had been entered and it was in the process of configuring the system when the calamity occurred. Now when I try to boot, I get the Acer logo and then a black screen with a blinking hyphen in the upper left corner of the screen. Since it's out of warranty, Acer refuses to help, and I'm at a complete loss on how to fix it. Also, it will no long boot either the MS Installation Disk nor the Acer Recovery disk from the DVD drive. Can anyone here help or suggest where I might go for help?
bobhjon

10 replies

by balge

hi
you could try booting to a live CD (UBCD4Win is good) if you have or can get one, and reformatting the drive with that,then start from scratch?
cheers!

by darryl~

Can you pull the hard drive out & install it in another laptop as a slave & reformat it...then start from scratch? I'd even delete the partition & recreate it.

by bobhjon

Sorry, Darryl, it sounds like a great idea but I just don't have another laptop.Certainly, I'm not the only person this has ever happened to ... there must be some fairly standard way of handling it.

by balge

hi
well I know there are laptops with two drive bays but I've never seen one...
you could slave to a PC but if you have to take it out, then a USB or firewire enclosure is also a good bet if live disk doesn't work

by bobhjon

Sorry! It just won't boot anything from the cd/dvd Drive. I've tried the MS installation disk, Acers Recovery Disk and a half dozenother fixup and recovery disks with no luck whatsoever. I can hear the system grinding away for several instants, but no boot.
bobhjon

by balge

hi
can you get into the BIOS at all?
cheers!

by darryl~

I don't suppose you have access to an external floppy drive...you could try booting to a Windows 98 Startup Disk & wipe it with FDisk then format it. Have you tried booting it to a USB divice? You'd probably have to change the boot sequence in the BIOS but it'd be worth a try.

by brian

I installed vista on my desktop pc at home, the install went fine, but i get the same screen you are when i try to boot it up, if i walk away for about 20 min and come back, vista is up and the system runs just fine! I don't know why it does it, i have tried re-installing it numerous times, but i still get the same problem each time. try just waiting a little while and see if it comes up (just out of courosity), it may rule out the issue of hardware atleast.

by older mycroft

How did you manage to have a 'power failure' on a mains-powered laptop when the battery would've kept the laptop going?

As to not being able to install - have you tried using the Recovery Partition (hit Alt+F10 as soon as you get past the boot password [if you have one]).

By the way, if you are going to check this situation online - you'll have more luck if you refer to it as [b]ASPIRE[/b], coz that's it's name.

This discussion is closed to new replies.