Question Locked

Windows System time privileges

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I recently took over administering a school's network and the guy before me was horrible and left me with a nice pretty much undocumented mess. Anyways, I've been looking around for some information on how to deny/enable access to changing the system time on the domain/PDC itself. When I initially got on the the PDC it didn't take me long to realize that I (logged in as Administrator [with domain/enterprise admin rights etc..]) was being denied access to change the system time... wtf right, especially since its an hour slow. So I went through some things in the default group policy object editor and only found some settings for the windows time service, really nothing about setting who has access to change the system time or to timedate.cpl. I can't really find much information on this, or if it's within group policy somewhere, or security policy -- (which is screwed up from my predecessor already, great, right.) Well I was hoping you guys could help me out if you knew where this setting was located. Or had any suggestions. Thank You.

8 replies

by retro77

Go to your DC
-Open up the Default Domain Controller Security Policy
-Local Policies
-User Rights Assignment
--Change the system time

by daywalker44

So now I know how to do that, if you noticed in the last post my Default Domain Controller Security Policy is not opening for me. I get an error message along the lines of: ".... cannot be opened you may not have the proper access rights......" then down below I get "network path could not be found" however I'm on the DC so I don't understand why it would be looking for a location on a different server/DC on the network in the first place. Has anyone ever seen this message? I might have to contact the guy who preceded me and find out what in the hell he did to screw it up. Thanks for any help/solution in advance.

by cg it

because what error you getting is indicating that your not actually logged on to the Domain Controller itself but are trying to make a remote connection.

by daywalker44

When choosing "Domain Controller Security Policy" and also "Domain Security Policy" from administrative tools I recieve the following error message(this is the case on every server so far, I have 6 relating to this issue):

Window Title: Group Policy Error
"Failed to open the group policy object. You may not have the appropriate rights."

Details:
"The network path was not found."

Since I took over this network I have been getting this error, I am assuming its something that the person who preceded me did to screw it up, like make a change and not fully update things accordingly where needed elsewhere.... I Really really need some help with this as I have a TON of work to do before classes start for the school very soon. Thanks much again in advance.

by cg it

SMB signing might be the problem but need to know if your getting event id 1058 in the event logs.

by daywalker44

I have a TON of Event ID 1058, a TON of 1054, around 10 or so 1053, and a TON of 1030. The last 1058 however was back on the 23rd of this month, the last 1054 was also back on the 23rd of this month (I believe I rebooted the server that day.), the last 1053 was on May 31st of this year, and the 1030's seem to be hit or miss the last being also on the 23rd, however there are lots of 1030's as well. Most of these seem to have to do with group policy, however I recently installed the GPMC and have sucessfully implemented windows firewall group policy in the meantime. I hope this isn't as bad as it is seeming to be. Right now I think there could be some type of conflict between DC's and I am not understanding why the person before me has three-four of the servers set up as DC's with AD. At the most I would expect 2. I've installed ADSIedit and noticed the entries within that are all for one of the other servers and not what I believed/was told is the Primary. However the one that I believed/was told to be the primary is currently listed as the operations master under the PDC tab in the operations masters window on the domain. HELP, plz. THANKS A TON!

by cg it

related to not opening the GP MMC is related to SMB signing.

here's a Microsoft Help and Support Article on SMB signing being turned off and failure to open the GP MMC.
http://support.microsoft.com/kb/839499/en-us

for the other events 1054 and 1030 again need the description for the event or you can look it up yourself at microsoft help and support.

http://support.microsoft.com/

As far as FSMO roles, you probably need to sit down and do an inventory of everything [while producing needed documentation]. I'd determine what the roles are for each DC and determine if 2 of the 4 might handle a site or child domain. If not, that 4 DCs is overkill and you can transfer roles from them, maybe demote them to member servers. Caution though that you've checked, double checked and tripled check what their purpose is and that you don't need them before you do anything.

This discussion is closed to new replies.