Question Locked

Windows Vista will not Shutdown completely, goes Beep Beep.....

0 helpful
14 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

About half the time I shut down from Windows Vista, my machine does not complete shut down and instead starts to emit Beeps (Bu-leep Bu-Leep Bu-Leep noises) from somewhere on the mother board or graphics card. The Sound does NOT appear to come from the Speaker (as I have Soundblaster Speakers plugged in and even when turned off, the beep continues). It does not come from the inbuilt speaker (as best as I can tell). I have the side panels removed from the PC so can localise the beep to mid-PC (nowhere near speaker).

This only occurs on shutdown, and not all the time. I do not use hibernate, low power mode etc. This is when you select manually the "Shut Down" option.

I have a desktop PC configured as follows:
- Intel Motherboard D845WN
- G Radeon 7500 Ver A Graphics Accelarator Card
- Creative Audigy 2 Soundblaster Card
- Network / LAN card
- Internal Modem card
- 2 Western Digital WD800 Hard Drives (100Gb Approx each)
- Microsoft Vista Business 6.0.6000 Build 6000 Original (not copy)
- Pentium 4 2.4Ghz 2393 Mhz 1 Core 1 Logical Processor
- BIOS Version: Intel Corp HV84510A.86A.0038.P10.0204151346 15/4/2002 (APRIL 2002)
- SM Bios 2.3
- Physical Memory 510MB
- Virtual Memory 1.5GB
- Page File Space 1GB

Two users have the machine, so there are two user logons arranged.

Vista is newly installed 3 weeks ago, and after a number of teething troubles with registration, validation, drivers, etc seems otherwise to be working fine. It just will not completely shut down.

What happens:
1) Select Vista option "Shut Down"
2) Windows presents the shut down screen
3) PC fails last step of shutting turning off (i.e it just hangs at that point with the windows screen showing "windows is shutting down"
5) PC begins to beep endlessly - steady double tone, constant rythym : buh-leeeep buh-leeeep buh-leeeep etc.
6) You are forced to press reset (5 secs) and then off switch to make it turn off

7) at next turn on - windows registers normal start with no problems at all

8) This happens over and over again.

Does anyone else have this problem, or a potential solution?

Thanks
David

14 replies

by jesus_c

wrong but it sounds like a memory error and you coulld do with another 512MB

by tjernagel

Ever since I installed Vista when I go to shutdown, the video card starts beeping, a slow steady beep and the computer never full completes the shutdown.

I have had some video driver issues under Vista but so far it's been able to recover and keep running. I have installed the lastest drivers from Nvidia's websight. I noticed the same issues with the Microsoft driver which was installed upon setup and the Nvidia downloaded drivers. I even tried the Beta Nvidia drivers, nothing helped.

It is my understanding a slow steady beep is low voltage, although I'm not positive. My power supply voltages are good and it is a Cooler Master RS-550-ACLY, 550 Watts, so I know it's not a power issue, but something that is controlling the power to the video card.

I can boot to WinXP and it's as normal as it always was, so...this is only an issue with Vista.

Any ideas out there on how I can resolve this?

Thanks!

PS: I'm not sure about your video card by mine, the 6800 GT has a small speaker in the corner and that is where my beeps are coming from, without a doubt.

Tyan THUNDER K8W (S2885)
Dual Opteron 256's 2.8 Ghz
Kingston HyperX 2GB (4 x 512MB)
Nvidia 6800 GT Video Card
Western Digial Raptor 74gb x 2 (RAID Stripped Boot Drive)
3ware RAID Controller 9500S-4LP
4 Maxtor 250 GB Drives (RAID Stripped Data Drive)
Creative Audigy 2 ZS Sound Card
Belkin USB 2.0 Controller
Koolance Exos Water Cooled

by dletts

Thanks for both your replies.

I received a suggestion elsewhere to remove Modem in case this was it. Tried that - no effect. Cut internal speaker and still beep continues. I confirm the beep comes from either mother Board or Graphics card. I suspect Tjernagel you are right - Its the graphics card. I pulled it out and yes it has a small beeper/speaker in-built. Also discovered that my fan on the graphics card is totally dead! Clogged with dust in the bearings and has burnt out. BUT - removed that and still the beep continues.

SO on balance I tend to agree that we are experiencing a new problem with graphics intensity of Vista overloading our graphics cards.

Others have noted that Vista burnt out chips on older cards as the loads on the older graphics cards were too high.

Thanks for this tip - the question is now - what do we do - upgrade the card? Upgrade the whole PC- or live with beeping until it dies?

regards
David

by tjernagel

I don't think it's a problem with your graphics card but a problem with the driver or the way Vista is powering down the bus, if it does power it down.

I have read the steady beep on the Nvidia card is a low power warning. My card is not only powered by the bus but also has a normal power connection running to it. I'm running a 550 watt power supply because of my configuration and know I'm not running out of power.

I don't believe it's a cooling problem because mine is water cooled and my whole system runs very "cool". With dual processors, the CPU's themselves run around 110 degrees F, so heat isn't an issue.

I can boot back up in WinXpPro and everything is normal, it's either a Vista driver issue or the way it is shutting down the computer. I found it interesting that it not only seems to be affecting Nvidia cards, but ATI's as well. I emailed Nvidia with the issue, maybe you should do the same with ATI.

I seriously doubt we will be able to correct this on our own. What I find strange is this occurs to me around 70-80% of my shutdowns.

I would like to know what changes were made to Vista that has caused such a problem in drivers and why the vendors are so far behind in getting us drivers for it. I run 3 RAID arrays and know 3ware isn't planning on releasing a driver for Vista for another month or so. What's the deal and why is this operating system so different from it's sister.

I do have one question for you, is your card an AGP or PCI-X card? Mine is an AGP because I'm running dual CPU's tyan didn't have this board available at the time as anything but AGP. If your card is AGP, then maybe it's an AGP issue? Just thoughts.

One other thought is what is your chipset? My AGP is the AMD-8151 HyperTransport AGP 3.0 Graphics Tunnel.

If I find out any work arounds, I'll sure keep you posted.

by tjernagel

Ok, you won't believe what I found my problem to be and hopefully it will help you too. Do you by any chance keep a 3 1/2 in the drive at all times? I do.

While playing with the shutdown I noticed it always hangs when it's accessing the floppy. When it first started to lock down, two beeps in, I popped the floppy out of the drive and it continued to shutdown normally.

Weird!

My next step was to create a small batch file which causes Vista to boot over and over again. Each and every time it booted just fine as long as I did not have a floppy in the 3 1/2 drive.

Ok, what gives?

My next step is to see if it?s Vista or Mcafee Viruscasn. Do you by any chance use McAfee? I do know it looks at the drive during shutdown to see if it?s infected to prevent the user from booting from an infected 3 1/2.

Hopefully this will help.

by yoseph203

Okay the reason why it beeps during is because some floopy drives do have system speakers if you remove the floopy drive it will not beep will not hang and will not cause anymore troubles

by dletts

Re: Floppy disks, and more (reply to the last 3 posts)

I don't use the Floppy disk on the PC at all, and I never leave a disk in it. However, I did note that on the shutdown that it continually "grinds" the floppy and CD drives as if it is seeking something.

I do use McAfee Virus scanner software as the normal scanner. I reinstalled this to see if this was the problem (with a newer release which had Vista Patches included) but same problem exists. It is random, there is no pattern we can detect. No CD's left in drive, no Floppy's, no USB Memory Sticks left in the USB ports, just random acts of senseless beeping!!!!!

We have taken to not shutting it down just to save our sanity. We are still working on the problem - and aside from all the menue changes in MS Office Word and Excel - we are very comfortable with Vista so far (except this dratted Beeping!: "Will no-one rid me of this troublsome Beep!" (with apologies to A Man for All Seasons" here)

Thanks for the tips:

Re: your other post: It's not a cooling problem, it is in an airconditioned area with the sides of the PC removed (still) as we try to locate the prblem, good clean airflow (for Saudi Arabia where dust is an ever-present problem). I checked the operating temperatures through the BIOS and all are comparable with other PC's (XP) I have here too.

The graphics card is PCI not AGP, so its not an AGP problem (unless by a miracle both AGP and PCI have the same error). I know that I never had this problems under XP on same machine so its NOT a hardware issue, but a conflict in the Vista - Hardware shutdown instructions or drivers, or possibly a MAfee issue related to Vista. However, I disabled McAfee to see if that resolved it and ran it withou McAfee for a few days and guess what - still beep beep beep!!!! on a random basis of course.

I'm taking it down to a specialist next week to reconsider the whole thing (on the excuse that I need a new fan connected as the old case fan has a lot of dust in it and is on its last legs (the CPU fan is fine) - so I might as well check out the beep issue at the same time) will also get memory upgrade done at same time - I must admit to being tempted to chuck the Graphics card and go for a faster one with a lot more memory as Vista is intensive on graphics (nice, but intensive). Will see how that goes on the wallet when I get there,

BUT - the point is - that according to Microsoft, the PC was perfectly capable of running vista as it was - not as optimal as it could be - but still OK (in their view). So why do we have this problem!!!!.

One other post here suggested removing the floppy completely - I might just do that as its close to totally useless nowadays anyway!

thanks for the ideas - we'll keep looking

regards
David

by shawn_prichard

I am having a similar issues, but with no beeping .. I just have to manual shut down the comp.

I have also tested by removing nvidia drivers and seen that the problem goes away.

Vista 32
Asus Striker Extreme nForce? 680i SLI Chipset w/7.1 Sound
Intel Core 2 Duo Processor E6600 (2x 2.4GHz/4MB L2 Cache/1066FSB
Corsair XMS2 Xtreme w/Heat Spreader 2048MB DDR2-800 PC6400
NVIDIA GeForce 8800GTX 768MB
2X WD 500 GB HD SATA II 7200 RPM 16M Cache
850 Watt -- Thermaltake Toughpower Power Supply

I used the remove programs option and removed the NVIDIA drivers then started my computer in safe mode and used Drive Cleaner Pro and then restarted the computer and shut down the computer several times with no problems.

I re loaded the current latest drivers and the problem came back. I repeated the process above and tested again with no problems. I loaded the current NVIDIA Beta drivers and the problem returned.

Here is a url on the nvidia boards with someone with a similar problem.. http://forums.nvidia.com/index.php?s=f0c699b003417600097346d31e94ae2f&showtopic=28221

There are also some on from Windows Vista discussion groups with similar probs. http://windowshelp.microsoft.com/communities/newsgroups/en-us/default.mspx

by shawn_prichard

Ok for me this was 100% an Nvidia driver problem (nTune). Here is how I fixed my Problem.

1. Searched for the word Nvidia from the start button search option.

2. Deleted all folders that said Nvidia Corperation (NOT THE VIDEO DRIVERS, and also NOT the Nvidia files made by Drive Cleaner Pro) NOTE: There was one (1) Reg entry that came up during the search that was from nTune which I deleted.

3. Used Run>regedit >find on the word nvidia and deleted all references to nTune.

4. Used "Advanced Windows Care V2" to clean any Reg entries that were not valid.

5. Removed the Nvidia video drivers using add/remove programs.

6. Tested that the computer would now restart and shut down with no problems.

7. Restarted computer in Safe Mode, and used ?Drive Cleaner Pro? to remove all Nvidia driver stuff.

8. Restarted the computer and used "Advanced Windows Care V2" to clean any Reg entries that were not valid.

9. Downloaded and installed the latest approved Nvidia graphics drivers from Nvidia.com.

10. Tested the computer again to ensure it would shutdown fully and restart with no hangs ups....

I am not sure that this is the same issue as everyone else is having but this fixed my problems .. Good luck.

Vista 32
Asus Striker Extreme nForce? 680i SLI Chipset w/7.1 Sound
Intel Core 2 Duo Processor E6600 (2x 2.4GHz/4MB L2 Cache/1066FSB
Corsair XMS2 Xtreme w/Heat Spreader 2048MB DDR2-800 PC6400
NVIDIA GeForce 8800GTX 768MB
2X WD 500 GB HD SATA II 7200 RPM 16M Cache
850 Watt -- Thermaltake Toughpower Power Suppl

by Former member

Hi dletts:

I just purchased a new Lenovo x61s notebook. I am just now learning about it. I went to shut it down for the night. But as you experienced the "windows is shutting down" screen just hung there. Finally, I got tired of waiting and just pushed the off/on switch. There was no beeping. So I am wondering--did you ever figure out the problem?

Look forward to hearing from you.

by dletts

Robert.
After 6 months of frustration, I finally upgraded memory (due to sluggish performance) and this seems to have conquered the problem. basically Vista does not seem to like it when you have 500MB of memory or less. It seems happier at around 2Gb or more. I have no other explanation for why it stopped doing it. I didnt change registry values, or graphics card etc. Sorry I can't help more: suggest you try expanding memory and see if that works (or not!) let me know
Thanks
David

by computertyro

I also had this problem.
Turned out I also had a floppy in the floppy drive. It was just a non-bootable data disk, but ejecting and resolve my problem

This discussion is closed to new replies.