7 replies
by hose_adomingo Accepted solution
by rob miners Accepted solution
create identical Accounts on each PC with the same password. I normally leave the default Workgroup Workgroup.
Rob
by hose_adomingo Accepted solution
Thanks for the suggestion. To create the workgroup in Vista, I went to start,computer, properties, change settings. On the computer name tab, I clicked on the button change to rename the computer. There is a space to change the name of the workgroup which I did, to Workgroup. In windows 98, I changed the workgroup name to Workgroup by changing the computer name in the Network Neighborhood properties. The windows 98 drive is shared with a password.
From the Vista machine I can see the Windows 98 machine. When I want to explore the c drive, there is a prompt for a user name and password.
I did not assign a user name for sharing. For Windows 98 workgroups, all you had to do was name a workgroup and you could read all the files you want on files that were shared. With Vista, there is the user name/password prompt.
I believe that this security is preventing the Vista machine from using a printer shared on the Windows 98.
How do I tweak the workgroup so Vista will allow information exchange?
by rob miners Accepted solution
a start turn off the share for C: drive in 98. That will stop the username password issue. You should never share the root directory. The proper way to access it is by mapping it. EG: net use F: \\PC\C$
Also the Map Network Drive facility \\PC\C$
Alternativly you can share a folder on the 98 PC and use the Map Network Drive facility.
As for the printer, did Vista ask for the drivers to be installed. I havent tested Vista & 98 printer compatability. I would be inclined to connect it to the vista PC. But check that you have the proper drivers installed.
Let us know how you get on.
by hose_adomingo Accepted solution
by rob miners Accepted solution
by perdido5463 Accepted solution
Back in the days of Win98 networking is was a requirement that if you wanted a computer to partake of the network one had to log in with an ID and (worded) password - that is the enter key by itself would not work to connect to the network - nor would the Escape key access to the desktop.
A worded password is also required for a Vista based network
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending