Question Locked

WINDOWS XP FAILS TO RECOGNIZE EXTRA RAM ABOVE 2MB

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello Everyone,

I recently installed 8mb of ram on a dell PC.

The cmos recognizes the 8mb but,following the initialization of windows XP, the OS only sees 2mb!

The 'msinfo32 utlilty' also recognizes that there is 8mb present.

I'm running XP with SP2 installed.

Is there a fix for this? How do I get the OS to recognize that there is 8mb loaded and not 2mb?!

Any help or advice wooulf be greatly appreciated.

Thanks,

Cathal

e-mail: tony.treanor@gmail.com

7 replies

by thechas

I presume you mean 2GB and 8GB rather than MB.

Anyhow, if you are running the 32 bit version of Windows XP, the only "fix" is to switch to the 64 bit version.

All 32 bit operating systems have a RAM address limit of 4GB this is a hard limit and no way around it.

Some of the address space is "reserved" for hardware level system housekeeping tasks.

The maximum amount of available RAM address space on a 32 bit system is 3.25GB.

With some motherboards, and some video cards, more address space is required for the hardware and housekeeping tasks.

While 2GB sounds low, it is possible that that is all the RAM address space available to Windows.

Windows XP reports the amount of RAM available for it to use. Not the installed RAM. For Vista, Microsoft has an update so that Vista shows the installed RAM rather than the usable RAM. But, the 32 bit versions of Vista still have the same RAM limits as the 32 bit versions of XP.

Chas

by oh smeg

Well the easy answer is load a 64 Bit OS here for starters. This is because no Windows 32 Bit OS can use mare than 4 GIG Maximum of RAM and that includes the Video Ram as well as System Ram.

Normally Windows will not see more than 3.2 GIG or there abouts.

Also when you looked in the BIOS for the RAM there did you save the changes when you exited the BIOS so that the new RAM was correctly Mapped tot he M'Boards RAM Controller?

If you didn't the hard ware is still thinking that there is only 2 GIG installed and is not allocating the newly installed RAM for use. The system should be unstable as well if that is the case.

Col

by thumbsup2

Did you mean to say GB (Gigabyte) instead of MB (Megabyte)? Because Windows XP won't run on 2MB of RAM, or even 8MB for that matter.

If you did mean GB instead of MB, Windows XP won't recognize anything over 4GB and won't actually use anything over 3GB.

What configuration of sticks of RAM have you put in? 2 sticks of 4GB? 4 sticks of 2GB?

by oh smeg

Not at all likely more likely to be 8 GIG as no current Windows OS would run with only 2 MB of RAM.

As modern M'Boards can carry 16 GIG without any problems I would say that the OP here means 8 GIG not 8 MEG. :)

Col

by netlord80

They have little known versions out there. Both XP and Vista have a "Fantasy Edition". An OS that was stable, worked as advertised, and was efficient.

This discussion is closed to new replies.