Question Locked

Windows XP not booting

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am having a problem with one of my XP machines. I have re-installed Windows XP more times then I can count now and tried various things to fix my problem but have been unsuccessful thus far. Basically after installing a fresh copy of WinXP and installing all the drivers I reboot and as soon as the machine gets past POST I get a blank screen. I ran CHDSK at the comand prompt in the recovery console and when I do it w/o the /p I get no errors but when I do it with the /p it says that it found errors. I can boot into safe mode with no problem but for some reason can't get into windows on a normal boot process. I am running a A8N SLI Premium boad with a 2.2 GHz single core 939 pin processor BIOS ver 1009 I think and 2 DIMMs of 512 400MHz memory with a SATA 320 GB drive from Seagate. Does anyone have any ideas?

4 replies

by larryd4

Well I'm not tryin to be a smart ass but..

Did you reboot after every driver install or did you do them all at once?

Reason is if you did it as you did each driver, you would pretty much know which driver causes the black screen.

I am assuming that, at one point, the fresh install was working.

As a suggestion you could isntall WinXP and then do all OS upgrades before installing any drivers except the network.

I am remembering a similar problem which was a video driver issue and you had to disable mup.sys from the recovery console.

by oh smeg

As these ABit M'Boards use the Realtech AC97 Sound and these are not Digitally Signed by M$ so they are impossible to install after the Windows Update Server has been contacted and any downloads performed.

Really sounds like a Video Driver issue though.

Col

by rob miners

Restart the PC in Safe Mode and edit your Boot.ini file.

Add these 2 switches /SOS /bootlog

EG: multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /sos /bootlog /fastdetect /NoExecute=OptIn

Shutdown and restart the PC as you would normally. Give it a few minutes on the blank screen before rebooting into Safe Mode and navigate to c:\windows\Ntbtlog.txt

Open the file and check to see what has been loaded and at the end of the log for the session you may find the offending driver.

References

http://support.microsoft.com/kb/833721

How to perform a Clean Boot

http://support.microsoft.com/kb/310353/en-us

Check the System Event Logs for Errors.

Have a look in Device Manager for any problems.

Keep us informed as to your progress if you require further assistance.

If you think that any of the posts that have been made by all TR Members, have solved or contributed to solving the problem, please Mark them as Helpful so that others may benefit from the outcome. ;) :D

This discussion is closed to new replies.