5 replies
by newmans9
Where is the Q & A area? Also, I posted this a few times and would like to delete the others. I did not realize every time I refreshed the page and resent that it would repost. Shame on me! Sorry 'bout that.
Thanks for any help on this!
Alex
by drmorton1
I do not know if you got an answer, but here is what I would do... I would check your cmos or bios area and look for reset to default. If this does not work re-load the OS... You may have to re-format the drive to get the OS to re-load the code. I would try to re-load without formatting first....
Good luck..
by hal 9000
In the control pannel under Administrative Tools just to make sure that Windows hasn't installed a driver for the original UPS? If it has it just might not like to play nice without that UPS being present even though you haven't installed the software monitoring program for the UPS.
I've recently had to change a UPS for a bigger one and had no problems and I had and now have the monitoring software for each of these UPS's installed. At least that way I know if something is going wrong.
At the very least have a look in the Device Manager just to make sure that Windows hasn't installed something that you no longer need as it has the uncanny ability to install new hardware without asking permission or requesting any install disks if the device is already listed in its data base.
by cfaasen
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending