4 replies
by zpursell Accepted solution
by oh smeg Accepted solution
It will allow you to test the Hardware without involving Windows.
If this loads OK you don't have a problem but if it doesn't load you need to look at the Hardware.
As you are not getting any messages about a Boot Failure it doesn't sound as if the HDD has suffered any damage but it is possible that the OS is corrupt and not going anywhere once the hardware switches to start loading it. Never the less you should run the HDD Makers Diagnostic Utility and check the HDD for correct function. You can get the HDD Makers Test Utility from here
http://www.tacktech.com/display.cfm?ttid=287
Col
by erichems Accepted solution
... would be an in-place reinstallation of your OS. I've had success doing this, but only after exhausting every other avenue.
Considering that you're not getting any error messages, this *might* be the avenue you need to take. More information on doing this can be found at http://support.microsoft.com/default.aspx/kb/315341
BUT, before you do this, can you provide us with more information (any error messages, beep codes, etc) that you note as you try to boot the system?
Thanks
by zpursell Accepted solution
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending