3 replies
by thechas
Enter System Properties. (right click on My Computer, select properties)
Click on Performance.
Under floppy drives, make sure that the box to check for new floppy drives is checked.
Click on the device manager tab.
Remove the floppy drive itself from Device Manager.
Re-Boot, and verify that the floppy is in fact set to 3 1/2" in BIOS settings.
Windows should find the new drive and install it properly as a 1.44 3 1/2" drive.
Chas
by isangbala
by thechas
Thanks for the additional information.
I wonder if the installer for the tape drive damaged or disabled your chip-set IDE driver.
I would start by downloading and installing the latest drivers for the chip-set on your motherboard.
If you still have problems: Here are links to a few MS Knowledge Base Articles that may help.
Chas
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending