Question Locked

Winxp Pro computers disappear from Network Places

0 helpful
17 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a network of five computers, all windows xp pro, no servers or domains, and all in same workgroup. Static IP (manually configured, not DHCP). When I restart my pc I can see all of them in Network Places, then after about 20 minutes, 3 of them (including mine) disappear. I can ping them, and still access mapped drives but can not see them in network places. I have checked ipconfig, ran cdiag, and browstat. XP firewall is disabled, I have KIS 7.0 and tried with and without it disabled with same results. The network has run fine for about 2 years, then about 2 weeks ago the PC's start disappearing.

If you need more info let me know. Thanks in advance for any help.

17 replies

by kjell_andorsen

Have you checked if the browser service is running on the affected computers? I've seen cases where this service stops running on computers causing them to disappear. If I recall correctly you'll find specific error messages in event viewer and MS has a hotfix for it.

by jdoggett

I have checked the browser service, even stopped them and restarted. I am not having the issues described in the hotfix for MS

by rob miners

to see if File and Print Sharing is enabled on the PC's.

Look at the power saving on the network cards and make sure that it is disabled.
You can use Device Manager to change the power management settings for a network adapter. To disable this setting in Device Manager, expand Network Adapters, right-click the adapter, click Properties, click the Power Management tab, and then clear the Allow the computer to turn off this device to save power check box.
< add a bit >

by jdoggett

File and Print sharing is enabled, I can browse the computer shares using \\computername, but the computers do not show up in My Network Places workgroup. The power save feature is disabled on all network cards on the LAN.

by rob miners

Each computer on the network has the same Workgroup name.
< also see if this helps >

Enable NetBios over TCP/IP in WIndows XP

Click Start, click Control Panel
Click Network Connections.
Right-click "Local Area Connection", and then click "Properties".
Click on (highlight) "Internet Protocol (TCP/IP)", and then click "Properties" button
Click the General tab, and then click "Advanced" button , bottom right.
Click the WINS tab.
Under "NetBIOS setting" section, click Enable NetBIOS over TCP/IP, and then click OK two times, then "close".
( ) Default
(*) Enable NetBios
( ) Disable NetBios

Restart the PC

by wesley.chin

Do the computers appear and then disappear after every reboot?

What happened on the computers and network between the time when everything appeared normally and when the disappearing first started?

by jdoggett

to my knowledge. We had installed a new large format printer, but I have already uninstalled this on all PC's without any luck of them showing up. Besides the printer is installed on 2 other machines that still show in network places.

by wesley.chin

Check to see if there is IP conflict. There was a time when it was static IP here, and that turned out to be the problem.

by jdoggett

IP are unique

192.168.0.100
192.168.0.21
192.168.0.25
192.168.0.53
192.168.0.102

Gateway 192.168.0.254
Subnet 255.255.255.0

Workgroup "Server"

No IP Routing
No WINS Proxy

by wesley.chin

Of the five IPs listed, which are of the unviewable machines? Looking at the IPs, I see that all of them end in 3 digits except two.

What is the method of connection? Wired or wireless? Are all of the machines on the same service packs?

Also, check to see if hibernation is enabled on any of the machines. Once the hibernation kicks in, the machine may become unviewable.

by jdoggett

The pc's that disappear end with 21,53, and 25.
All hardwired connections and SP2. Hibernation is disabled on all machines.

by jdoggett

All pc's have same workgroup (SERVER) and I double checked the netbios over tcp/ip is enabled.

Man this is a pain, It seems like I have tried everything with no luck, so I really appreciate all of the suggestions I have gotten so far.

by rob miners

changing your workgroup name server back to the standard setting WORKGROUP. Make sure that DNS is pointing to your ISP.
Your scope is in range.
Subnet Mask Subnet Size Host Range Broadcast
192.168.0.0 255.255.255.0 254 192.168.0.1 to 192.168.0.254 192.168.0.255

by jdoggett

Tried the change back to the default WORKGROUP and they still disappear.

by rob miners

on your Router/Modem

192.168.0.100
192.168.0.21
192.168.0.25
192.168.0.53
192.168.0.102

try changing the IP's to this

192.168.0.100
192.168.0.121
192.168.0.125
192.168.0.153
192.168.0.102

by wesley.chin

try adding a "1" to all of the IPs of the machines that are not viewable, ie 121,153,125.

This discussion is closed to new replies.