Discussion Locked

WinXP Remote Desktop through VPN, ICS and ADSL

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello,
I'm trying to use my office pc from home using Windows XP Remote Desktop feature.

Scenario
My office network includes some winxp pro desktops connected as peer-to-peer (192.168.0.N); one of those is acting as Internet Gateway via Internet Connection Sharing and has two nics; the second nic is connected with an ADSL modem/router (10.0.0.N) Thompson Speedtouch 510 (addresses are translated via NAT by default).
At home I just have a WinXP Pro laptop that connect to the Net with dialup/standard modem.

My Problem
To use Remote Desktop from the Net I need to know the public IP address of the desktop I want to reach; the only IP from my Office I can reach is the ADSL modem since all the other office desktops have private addresses; I set up a VPN (incoming connections) on the desktop acting as Internet Gateway because I'd also like to access aother office network resources; VPN is not working either because I can't reach this desktop from outside.
I found an article that says how to remove the NAT feature from the ADSL modem (http://www.stonki.de/Speedtouch_510.13.0.html) but before going on I'd like to know if this is the best way to solve my problem or I should change my network architecture?

1 reply

by impulse

Install the IIS services onto the gateway machine. This Ip address you can obtain. From the server machine, make addustments to link to other ISS services on the network. Hopefully with this done, you can log to the know -ip website, and connect to any "server" on that network. (Hense "Server Name")

This is using the "Web based connection" Not strictly the local client installed on your home machine.
I may be missing something here, let me know.

This discussion is closed to new replies.