Networks

Ask something
Question Locked

wireless acces point 2100AP

0 helpful
2 replies

by nerdygeek007

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

hello,
I have 2 WAP dwl 2100 APs with 2 antennas. The first antenna is used as a repeater (transmitter) and the second one as a receiver (wireless client). I have connected the wireless client on a switch and only 1 PC works(lan and internet). When i reboot the AP (receiver) the first PC it detects connected to the switch will work. I want to make my setup work with 2 PC. How should I configure the APs?

2 replies

by mdfreeman

I'm not familiar with that model of AP, but looking at the documentation, it seems that you should have it configured in Access Point mode instead of Wireless Client mode. Check the documentation that came with the AP or use this link: http://www.dlink.com/products/resource.asp?pid=292&rid=919&sec=0

The AP will only support one mode at a time, so I don't know how you could configure each antenna seperately.

This discussion is closed to new replies.