Question Locked

Wireless Connections and Semi CB radio's

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have computers that need to be part of Workgroup A that resides in another location about 650 feet away from the workgroup. The least expensive option is using wireless routers/AP's to do this.

I am thinking about using these:
Wireless-N Nfiniti Broadband Router and Access Point from Buffalo. Using a Windows OS (XP Pro)

Question is whether or not Semi Truck CB radio will interfere with the transmissions of the wireless routers. The company that would like this done is a small trucking company so CB radio traffic will be very high.

A server and domain would be overkill for this particular client but, I'm open to any other suggestions to make this happen.

6 replies

by nicknielsen

The CB band is at 27MHz, Wireless-N is at 2.4 GHz. Just tell your drivers to turn off the PAs before they hit the yard.

by mjd420nova

I say normally because most truckers don't have just a CB, Most have linear amplifiers and they will totally wipe out a wireless hookup. For that distance it might be better to look into an infra-red hookup, they can't be interfered with or intercepted.

by sirkozz

Use 2 Cisco 1400 series bridges, 5.3GHz will not be as susceptible to interference from CB's and the waveform is also very different.
btw they come with an internal antenna which should be able to give you 54MBs given that there are no obstructions of the Fresnel zone.

This discussion is closed to new replies.