2 replies
The setup you have described shows that you have just created a LAN using the wireless access point as a Switch/HUB.
The usual way wireless distribution of internet works is that you require your ISP provided modem with Ethernet out, A wireless router[which also acts as a AP] so now the modem is connected to the wireless router & PC & other machines are either hard wired or connected through wireless to the router.
Your current setup does not allow internet to be passed on to the other computers because only routers can do the job
Suggestions:
1. Check for USB-IN wireless routers in the market & replace this linksys AP for that wireless router
2. Ask you ISP to replace the current modem with Ethernet out modem [unless you have that provision in the current modem] & buy a wireless router & setup the way i have described earlier.
3. I am not sure if this will work, but you can try. Enable ICS[Internet connection sharing] in both the computers.
Enable ICS for server PC[in this case your PC]
http://www.practicallynetworked.com/sharing/xp_ics/serverbroadband.htm
Enable ICs for Client [Laptop]:
http://www.practicallynetworked.com/sharing/xp_ics/clientwiz.htm
ICS info:
http://www.practicallynetworked.com/sharing/xp_ics/index.htm
& by the way i think your product is WAP54G
hope this helped
by johnoconway
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending