As someone who has worked a lot with RF and EMI issues, your only viable option is to switch to a different wireless band. Or, switch to wired networking.
Without knowing more details about both your wireless network and the security system, it sounds like both systems are using the same RF frequency spectrum. As such, the stronger transmitter takes control of the spectrum.
It is possible that one of the cameras has a "dirty" signal. You could try turning off the cameras one at a time to see if any one camera is causing the interference. If just one camera is the problem, it might be defective.
Another thing you can experiment with is placement of the equipment. I would want to have both the wireless router and any computer that connects to it be a minimum of 20 feet away from either the security system base station or any cameras and other sensors that transmit back to the base.
It would also be worth the time to contact the company that made or installed the security system. They may have a simple fix such as changing the carrier frequency of the security system, or lowering the transmitter power level.
Still, all in all, my personal preference for correcting the problem would be to switch to wired networking.
Chas