Question Locked

Wireless Router Issue

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Installing a Netgear Wireless Router (MR814v2) in my cousin's home office. Actually reinstalling it. I had a brother printer, and a desktop connected to it.He is using DSL provided by SBC, which uses PPPOE. Here is what I am experiencing:
If i plug in the efficient networks mindstream 5100 modem to the the Router's WAN port, I can not browse on the desktop or browswe on the laptop. It shows excellent signal on the laptop and that the desktop is connected at 100Mbps. I thought it could be the router not connecting because of the username/password, but the information saved on the router is correct. Now if i switch the cable into one of the LAN ports, I can surf the net and the laptop can surf as well. The printer isnt recognized; though it is recognized when the modem is plugged into the WAN port. All lights on the router are lit up and blinking when plugged in via both methods. Any suggestions or anything i am overlooking?

i experienced the same problem with a netgear device at my home with sbc as the carrier. i never got around to attempting to set up the network in my house again.

4 replies

by langlier

Make sure the Router is set to use PPPOE. Most are not by default. There are many documents on how to change router settings. You can log into your router by default by connecting a PC to one of the LAN ports hardwired with an ethernet cable. Typing 192.168.1.1 into a browser (IE or Firefox) window and the login is admin with no password. from there find the correct place to change to PPPOE and do so.

by p_lazarus72

Just to add, make sure that firewall is not stopping you shared printers and others folders in your main pcs. Also make sure the printer is set to shared.

by craig herberg

Your DSL modem should be connected to the WAN port -- otherwise it is being used as a hub, not a router. It looks like your DSL modem is already loggin-in for you, in which case your router should be set for DHCP.

I hope this helps.

Craig Herberg
http://info-safety.com

This discussion is closed to new replies.