Question Locked

Wireless security in 2003 server and vista clients.

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am having a problem getting my clients to connect to the server using IAS.

My setup:

Server 2003 Enterprise
lan1 - cable modem
lan2 - linksys wireless router wrt54gs v5

Clients - Windows Vista Home

I have set this up before however the only difference was I was using win XP clients. So far I cant get any client to connect or authenticate with the server there are a few error messages I get.
Event Type: Error
Event Source: IAS
Event Category: None
Event ID: 3
Date: 7/25/2007
Time: 1:37:29 AM
User: N/A
Computer: STONESERVER
Description:
Access request for user APARTMENT.LOCAL\stonec@apartment.local was discarded.
Fully-Qualified-User-Name = APARTMENT.LOCAL\stonec@apartment.local
NAS-IP-Address = 10.10.1.2
NAS-Identifier = 0016b6d77e9b
Called-Station-Identifier = 0016b6d77e9b
Calling-Station-Identifier = 00146cca8765
Client-Friendly-Name = WLAN
Client-IP-Address = 10.10.1.2
NAS-Port-Type = Wireless - IEEE 802.11
NAS-Port = 40
Proxy-Policy-Name = Use Windows authentication for all users
Authentication-Provider = Windows
Authentication-Server =
Reason-Code = 5
Reason = The user account domain cannot be accessed.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 ....

along with this one

Event Type: Error
Event Source: IAS
Event Category: None
Event ID: 5052
Date: 7/25/2007
Time: 1:37:22 AM
User: N/A
Computer: STONESERVER
Description:
There is no domain controller available for domain APARTMENT.LOCAL.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

I have already checked and registered IAS with AD. I am not exactly an expert on this and could use any suggestions. I am wondering if its a problem with vista or maybe something on that end is different than XP, however I dont see a whole lot of options when configuring the wireless.
I have heard that IAS can be touchy when connecting so i tried user + password + doman as well as user@domain and from what i have searched I cant really find a good article that shows how to set this up from scratch. All this is is a basic 1 server and a few client setup I just want to beef up the security by adding domain authentication and eventualy certificates (service is already installed)

One thing I am not sure of is in the linksys setup for wireless security there are many options that include a radius server WPA Enterprise, WPA2 Enterprise as well as RADIUS, another question is which one should I be useing, the RADIUS option has a WEP key in it as well but I dont have any option to use it either in the server setup nor the clients. Can someone enlightn me?

Any help would be appreciated thanks.

if you need any more information i will gladly provide it.

6 replies

by oh smeg

That you are using as Home Premium isn't supposed to be capable of adding to a domain.

You need a higher version of Vista to do this Ultimate should suffice as it's supposed to have the same capabilities as XP Pro though Personally if this was my LAN I would be looking at Vista Enterprise as it has better security built in and can also be purchased on a Volume License.

Col

by stonec

If it makes a difference I am not really putting the computer on the domain just using the user/pass to authenticate with the wireless. And when i set the router to connect to the radius I do get a prompt on vista to enter the user/pass/domain. But when i enter the info and try to connect thats when IAS gets that error and logs it.

by oh smeg

At the Prerelease Launch of Vista.

Vista Home Basic and Premium have the same placement in the market as XP Home and Vista Ultimate/Business are comparable to XP Pro. The fact that you are being prompted for a Domain Password I would think is a telling point as the WiFi link must be working and the moment that you attempt to connect to the other side of the WiFi Access Point you get the request for the Password. This should be from the Domain Controller/Server.

As I currently do not support Vista I'm not 100% certain as I've only used the Enterprise Version of the production Release of Vista and even then it's on a Volume License Copy which I bought in November 06 to play with. Currently I only have 1 working copy installed and as I've yet to use any of the Bottom of the range versions of Vista I can only rely on what M$ has told me.

But if Vista Home Basic & Premium are the equivalent of XP Home that is not possible to connect to a domain so neither of those should be either. On the other hand if you are in the US all you need do to upgrade to a higher version of Vista is buy a License and change the Product Key as all the different versions of Vista come on the One DVD and only the Product Keys are different.

This should be a relatively cheap and fairly painless upgrade direct from M$.

Col

by stonec

For clarification, I am not trying to put the computer itself on the domain just useing the domain to authenticate the wireless connection, not sure if this is exactly what your talking about but figured it was worth the clarification.

by harindra000

I assume you are using EAP-MSCHAP V2 for remote authentication with IAS using WiFi connection.

I received IAS 5052 and IAS 3 event IDs when I disjoined XP Pro system for testing. Once connected back to domain, authentication works well.

I'm facing the same problem with all Laptop clients who are not in the domain. Whatever the OS version you are using doesn't matter. you get the same error codes.

I assume that there is some configuration problem at clients side.

Perhaps there might be a hotfix to this issue.

This discussion is closed to new replies.