Question Locked

working with 2 domains on one physical network for inetrnet/e-mail access

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi this is my situation..
we are merging 2 companies, both have an existing domain in place Company A (win 2K, campanyA.local, 192.168.0.10, 255.255.255.0)
Company B (Win SBS 2k3, companyB.local, 192.168.1.50, 255.255.255.0, no exchange installed/active)

We are physically moving Company B and it's servers to Company A's office..we don't currently need them to communicate between each other at this point (maybe in the future) so all I need is for Company B's workstation/servers to communicate with each other (with it's own domain) and for them to be able to access the internet and retrieve pop-e-mail from our ISP (no exchange installed yet). We have a symantec gateway security 420 router (DHCP enabled .11-.50 scope) which is a little confusing to configure..

What router configurations if any need to be done, what subnet issues do I need to consider (or can they reside on the same subnet?), are there any AD considerations..can this be done easily or what better suggestions does anyone have?

Thanks

2 replies

by cg it

Small Business Server doesn't allow trusts between domains, so there is your first problem. You'll have to upgrade SBS to W2003 Standard if you want users in one domain to access resources in the other domain without VPN into the SBS domain [and you have to create accounts in the SBS domain for users who will VPN in].

your best bet at this point is to have both domains behind a perimeter router that has 2 LAN ports [or more]. Turn off DHCP on the perimeter router. With the non SBS domain, install a DHCP server on their subnet or use Static mapping. Have the SBS network with 2 NICS. The internal NIC will service the SBS domain, external NIC will hookup to the perimeter router. DHCP on the SBS box.

since your not running Exchange [and at this point its a good thing] if users use outlook, have outlook configured to directly go to the pop3 server to get mail.

This discussion is closed to new replies.