Question Locked

XP boot image file

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am trying to get my spare machine to boot from the main machine (both running XP Pro). Both are networked via a SMC router. When I set the spare to boot from LAN it connects to the DHCP server (the router) and then faults because it is looking for a boot file. I have scoured the net without sucess looking for info on creating/using this file. I would be very grateful if someone could either explain the process or provide links to the information (preferably a guide to setting up the network boot).

Kev

6 replies

by balthor

I think that it has something to do with the way that the real BIOS is set.Not the Phoenix,Award,AMIBIOS or manufacturer's BIOS but the actual ROM BIOS in the BIOS chip that is there before any other BIOS files are recorded.The network card has to be fully working and I do not think that it works correctly until Windows is running.The boot file is on the hard drive and the network card has to find the C: drive to boot.If the REAL BIOS were set to its defaults then I think that everything would run fine.Computers were designed to network easily and this is done in the BIOS settings.

by freddo_frog

Thanks for your input but the network card is operational before Windows starts to load. It connects just fine to the DHCP server (router) and is assigned a network address. The problem is after all that it then looks for a boot image file and fails because it can't find one (and I haven't a clue how to make one).

by freddo_frog

Excellent little guide - thanks for that. Unfortunately it still doesn't address the method for doing it with XP (it uses Linux).

This discussion is closed to new replies.