9 replies
by user60442762 Accepted solution
by older mycroft Accepted solution
What does that mean ?
Why would you delete the restore partition?
What did you use to delete it?
by oh smeg Accepted solution
So you need to include the SATA Driver in XP and reinstall XP.
When the first Blue screen appears press the [b]F6 Key[/b] and wait till you are prompted then insert a Floppy into the A Drive a with the SATA Driver copied to it's Root and press Enter.
Yep I know no good for you here as you don't have a Floppy Drive so you need to make a Slipstreamed Install Disc and include the SATA Driver.
There are a couple of way to proceed here the first is to follow the directions here to make your Slipstreamed Install Disc
http://articles.techrepublic.com.com/5100-10878_11-6150784.html?tag=rbxccnbtr1
Download this TR Article and follow the directions
http://downloads.techrepublic.com.com/abstract.aspx?docid=172974
Both of the above are the same TR Article or you can use a product like nLite to do the same thing.
http://www.nliteos.com/download.html
If you chose to use nLite make sure that you read the directions for its use located here
OH just in case I didn't explain it well enough if you deleted the Recovery Partition after Installing XP you will need to reinstall XP again as the Recovery Partition is the Primary Boot Partition of the HDD and when you deleted it you deleted the Base XP install Files that tell the hardware where to look for the Windows Files. :)
Col
by user60442762 Accepted solution
The disk is slipstreamed with the SATA driver.
The deleted partition (D:\) did not contain any XP files, it help the restore image for vista; XP was installed on the Primary partition (C:\) and replaced the vista install not the recovery image.
by oh smeg Accepted solution
The Recovery Image is a FAT32 Type Partition and is always the Primary Boot Option for the Computer. However as this is at the Hardware Level not the Software you will not have seen any of the Primary Boot Files listed. These are the very basic files that tell the Hardware where to look for the Programs to start loading the OS.
If this was in DOS they would be the AutoExe Type Files.
I repeat if you deleted the Recovery Partition after Loading Windows you have deleted the basic Files required to start off the Booting process. You need to reinstall the OS to allow this computer to work again but if you then make changes to the Recovery Partition again you will adversely affect the [b]Basic Windows Boot Files[/b] and need to reload the system again.
With every Windows install there are some files that you [b]Can Not[/b] see which are Critical to the operation of the computer.
Here you would probably be safer to wipe the HDD and reinstall Windows to the Entire HDD to prevent this happening again.
Col
by rob miners Accepted solution
by rob miners Accepted solution
Boot from your XP CD and press the first R to enter the Recovery Console.
At the recovery command prompt type in these command pressing the Enter key after each one.
diskpart
select disk 0
select partition 1
active
Now type
EXIT to exit the diskpart session
fixmbr
fixboot
Restart the PC with the XP CD removed.
by user60442762 Accepted solution
The partition was not marked as active.
I booted off a linux live cd and ran cfdisk and set the partition active because diskpart in the xp recovery console seems to only allow you to create and delete partitions. Ran fixmbr and fixboot again and now it works.
by rob miners Accepted solution
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending