11 replies
by xt john
by w2ktechman
A service or device is unreachable. It can hang for 1 minute for each. How long did you wait before rebooting?
Try unplugging all external devices (except keyboard, monitor, mouse) and see if it boots up better.
If it does not, it may be a failing HDD (not reading properly) or corrupt files. You can try inserting the XP disk, and running a repair.
by darts32
Might be a damaged MBR. Try this site for instuctions: http://tinyurl.com/fn7be
use the fixmbr command in the recovery console to create a Master Boot Record.
by hal 9000
I had a similar problem on one of my workstations the unit would POST and then start the Windows Splash Screen and then reboot.
The problem here turned out to be a bad IDE Controller on the M'Board.
But before you throw away a M'Board download the HDD Makers Drive Testing Utility and test the drive to see if it's still working correctly. If that passes then you need a copy of the Ultimate Boot Cd and do some Diagnostic Testing on the computer. You can get a copy from
Col
by kimo99
by paul
by tibmeister
by dlloyd
by 500cubes
Have you opened up the computer case and checked the mainboard hardware. Quite a few GX270 & GX280 mainboards were constructed with Nichicon HM or HN series capacitors that were contaminated.
Dell Optiplex gx280
http://www.badcaps.net/forum/showthread.php?t=1034
Dell Optiplex GX270 & GX280 bad capacitors
http://www.hawaii.edu/technews/item/elog/13696
PCs plagued by bad capacitors
http://asia.cnet.com/reviews/pcperipherals/0,39051168,39289727,00.htm
The Dell diagnostic disk that come with the 280 is a really great tools for figuring out this type of thing. Run the complete diagnostics. It should give you an idea of where to start.
I have worked on Dells since the precision 420 workstations for an agency, covering 400+ stations. The diagnostics disks work well for basic analysis.
by deltafive
Computer rebooting before the OS actually finishes loading is likely to be the result of either a bad RAM chip, or your OS is has a corrupt registry.
You can try first to boot your computer with F8, and choose to allow the computer to start without rebooting at system error. This will generally allow the BSOD to stay on the screen. I've had this with two machines in the past month (both XP Home). The BSOD showed registry error. If this is the case: sounds to me like you will have to reformat your drive, and re-install the OS, that's saying you have the restore disks yet from your Dell computer, or an original copy of XP. Connect your drive to another computer, directly or through an external drive enclosure. Backup your documents, email information, and whatever other files you deem necessary. Reformat, and re-install.
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending