4 replies
by jkm2a1 Accepted solution
by oh smeg Accepted solution
It could be something as simple as the Router/WiFi Access points not being configured to accept any more than a certain number of concurrent connections at a single time.
Whatever is being used to connect to the Net here I would guess is the problem and you need to enter it's setup procedure and increase the number of concurrent connections that it will allow.
Col
by rob miners Accepted solution
There is a fix here see if that helps
Inactive components and/or blocked internet connection after update to 8.0.196
http://www.avg.com/support
Keep us informed as to your progress if you require further assistance.
If you think that any of the posts that have been made by all TR Members, have solved or contributed to solving the problem, please Mark them as Helpful so that others may benefit from the outcome. ;) :D
by symon.l Accepted solution
So you can ping and you get a ip back etc so the PC can get see the big bad world out there so the only thing that sounds like is being blocked would be the ports which could be one of the routers or the one router depending on your setup.
You can check to see if the ports open to rule out any PC Hardware problem by doing this on the work station in question.
Start > Run > CMD > Enter
in the command box type
telnet techrepublic.com.com 80
Hit enter, leave it for a few secs you might not see anything in the box type anything on the keyboad you will proberbly see a little line move and then hit enter twice and if you get an output like this
Then the PC is on the internet, its not a router problem or permissions problem its a software issue with that PC.
Let me know how you get on :)
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending