7 replies
by xrenx215 Accepted solution
by thumbsup2 Accepted solution
by xrenx215 Accepted solution
by thechas Accepted solution
The driver for ALL optical drives under Windows is part of the chip-set driver.
Make sure that you have the correct chip-set drivers and try installing them again.
Sometimes, you need to remove the IDE controllers from Device Manager and reboot to allow Windows to find them again and install the drivers again.
The only other driver for an optical drive is that used by disk burning software like Roxio and Nero.
Chas
by rob miners Accepted solution
Startup in Safe Mode and navigate to C:\WINDOWS\DRIVER CACHE\i386, create a folder named Backup and copy the contents of the I386 folder into it. Go back to the I386 folder and delete all the files that are in there. Open Device Manager and Click Update Driver.
Restart the PC.
by alashhar Accepted solution
by reisen55 Accepted solution
If your system has two hard drives in it, check in control panel, Admin tools and drive manager to see if another hard drive letter is assigned and over-writing the natural drive letter of the cdrom itself. This is more common with usb key devices but it can be an issue.
And try another CDRom drive? Nothing says it is working anyway. Cheap enough.
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending