Question Locked

XP OS, will not boot beyond BIOS

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have an AMD 2800+ with XP Professional; I don?t have the original XP disk but I have the 25 digit product code and I have another (legal copy of) Windows XP Professional.
I can get into, and change options within, the BIOS; but I can?t get any further than that.

This is the sequence of events:

1)Original PATA) disk was partitioned (C & D)
2)Added WD 500GB SATA and partitioned it (F & G). Using WD Data Lifeguard Tools I transferred everything from C to F and from D to G.
3)I disconnected the old drive and made the new drive the active/system disk.
4)Everything worked well and I installed the Windows updates etc.
5)When I next booted the pc I got a menu asking which OS I wanted to load. The screen showed (from memory, something like):

Windows XP
Windows XP

6)It didn?t make any difference which option I picked since the PC booted to the Windows desktop. I once had a similar problem to this and it involved running MSCONFIG. When I ran MSConfig and looked in the Boot.ini tab and under [Operating Systems] I expected to be able to delete one of the duplicate ?Windows XP? entries but there was only an entry for Recovery Console, so I delete that.
7)When I rebooted, I found that I could get into the BIOS and change any option ? if necessary ? but once out of there it would get just past where I could see what HDD's were present and then the screen goes black and nothing happens.
8)I tried re-connecting the original disk but I get the same result.

I need help. What should I do?

Thanks

3 replies

by offtherails2010

Hope this will help....

If you can still get into the bios,thats great, it means that there may b a problem with the MBR (master boot record) of the XP installation... i have had similar problems!

1. In the bios, select the 1st boot device to be ur cd or dvd drive,

2. insert ur other XP Pro cd in drive

3. Select exit and save changes in bios.

now, wen the XP cd takes control, let it boot up into the menu where it gives you the option to install XP.

Now press 'R' to repair the windows installation using the recovery console.

4. when the recovery console loads up, type in:

fixmbr (& press enter)

after thats done, also type in:

fixboot (& press enter)

when thats finished, type:

exit (& press enter!)

This will now restart ur pc, but get bk into the bios and select the 1st boot device as ur hard drive with xp on it, save and exit bios and it should now boot into ur xp.

here is a very helpfull link of commands for the recovery console:

http://support.microsoft.com/kb/307654

if the above help doesnt work (plan-B!), just reinstall XP on ur new active drive!

This discussion is closed to new replies.