Discussion Locked

XP VPN Client connecting to NT 4 RAS

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

XP VPN client connecting to NT 4 RAS
I have been running RAS server to provide VPN connections via the internet for 2 years or so. I have not had any problems connecting up win98 clients. Now a home user has XP and when I configured the client in XP to connect to the ip address of the RAS server it never reaches it. I do not see any event in the logs etc. saying why the connection was refused. I used an account that I know for sure has dialin privelages etc... just seems to be something different between these and the others. This user does have a home network (most do not - the only other one that does is me, and I use a different network than at work...i.e. not 192.168.1.xxx.

Would this be a problem if the user does have the same ip network at home as we do here at work? That is the only thing I can see that might be a problem but since I never even saw a connection error I am doubting that is the problem.

Any insight is greatly appreciated.

Koke

4 replies

by aclopez5

Having the same private addressing on the users' home network and your corp network will definetely cause problems... but not this problem. You should still be able to establish the VPN (routing after the fact would be affected).

What does the home users' network look like? Is there any NAT going on? Is it using ICS or some hardware device? DSL or cable?

by koke

The home network is a 4 port router that is fed directly from their cable dsl. I might add that I have the same internet service at my house, but use a dual homed machine, internet connections sharing, and a hub with win98 vpn client to connect up with no problem. I don't think the cable company has anything that interferes, since I cn make the connection.... but I won't know what the router is using until tomorrow a.m. when I go there again and look.

Koke

by koke

The user is using a linksys router to share their internet connection. I have the same cable ISP, but use ICS to share my internet connection. I have no problem connecting with a WIN98 client from anywhere in my home network. I am going to give NT 4 Workstation this evening. A vendor is having the same problem and they too use a Linksys router with their DSL connection

by koke

I found a setting in the filters for the router to allow pptp traffic. After selecting that (and changing the private network) the client ran great!

Koke

This discussion is closed to new replies.