Discussion Locked

5 PC's with no CD ROM, new install.

0 helpful
20 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a job for a Cyber Cafe, I built them 11 PC's. The owner wanted 6 with CD ROM and Floppy, and 6 just with Floppy. Since I built them, the HDD is blank, I was told that there is a way to connect these 5 PC's w/o CD ROM's to the Primary PC( Server.) So I can install WinXP Pro, Norton 2005, Office, Coral....etc...The network isn't up yet, so how do I do this? Connecting a PC that still needs to be formatted, so I can install the OS and transfer all the other data to it? ASAP, the inauguration was on Saturday, and I have no idea how to get these 5 PC's w/o CD ROMS operational. Sad isn't it, that I can build them but I have no clue how to link them together to install the OS without a CD ROm installed....Please Help !!!!!!!!!

20 replies

by maxwell edison

Why can't you simply install a CD-ROM drive, temporarily, to do the software installs, and when everything's installed and configured, you can then remove the drive?

by willcomp

Good idea Max. Simple and elegant.

Another alternative is to ghost drives (duplicate hard drives) if all PCs are nearly identical (same mobo and CPU type).

You can't connent to a network without an OS.

Dalton

by willcomp

Why don't you take some time and rate answers from your previous question. Obviouly you got the system set likely using our input.

You need to do your part as well.

by willcomp

To duplicate a drive, you will need:

1. A copy of Norton Ghost
2. A boot disk (recommend essential boot disk from link below).

Copy ghost.exe to boot disk.

Connect blank HDD as secondary master.

Boot from floppy and run ghost.

Select drive to drive in menus.

Select HDD with OS installed as source drive and blank HDD as target.

Copy.

Note: Newer versions of Ghost will run from within Windows, but I have had better success running from floppy. Also recommend Ghost 2002 for HDD duplication. It seems to produce fewer errors.

http://freepctech.com/pc/002/files010.shtml

Dalton

by cg it

use a PXE enabled NIC on all non CD Pcs. on your "server" run DHCP server. Create a distribution share with the image you want on the PCs then use the UNC \\\. Make sure you have a good answer file made up for an unattended installation of the O/S. Lots of articles on remote installation on the microsoft help and support site that gives step by step remote installation of a image to target computers.

by cg it

I do it all the time when we phase out old computers and add new ones. Works like a champ.

Now for the cybercafe guy, might be a little more involved than he really needs. Maxwell's advise is a lot less hassle but for info purposes, you can install an O/s remotely.

by dkzgambo

i've never heard of a connection of computers having no OS. Try to remove the hard disks from their respective cases(those having no OS) and use the one's with CD-ROM'S to install the software. There is a way really to connect the pc's but that is after installing an OS. You can share the CD-ROM on the server when and if the network is up and running. no shortcuts on this unfortunately.

by rindi1

The easiest for you would to follow the suggestions you had before with a temporary CD Rom. If it is newer Hardware you should be able to boot from a USB Drive, so you don't even need to open the box. To use Ghost images you need Harddisk imaging software like Symantecs norotn ghost or Acronis Trueimage. I think you could get both as trial versions, so you could start soon. This software makes an 1:1 image of your disk to an image file (compressed) and then you can play it back to another disk. You will then have to change certain values like PC name, IP Address etc, those things can't be the same on a network! If you want install from network you would have to create a dos boot diskette with the drivers of your network card and the microsoft Dos Client, but I believe that would probably be to complicated for you to learn in your short time, as it seems you haven't much network knowledge yet.

by sue t

I use Ghost to make 2 boot disks that have TCP and nic driver information on them and a crossover cable. If you have a computer that is set up the way you want that will be the master computer and you will connect a crossover cable from that one to one that needs to be setup. Put your ghost boot disks in and have computers boot to floppy drives. This way you do not need to understand networking but you will need to change the computer name on the "Slave" computer after it has been imaged from the Master computer.

This discussion is closed to new replies.