There are two type of Power Supply sold for computers. the first is a Peek Value so it can run at it's max ratting for short periods of time and then requires to be left at a lower power till it recovers. This can range from 2 minutes on and 5 off to 30 seconds at peek loads and 25 Minutes at a much reduced power rating before it can be maxed out again for another 30 seconds.
Most of these NVidia Video Cards require you to plug in them to the Power Supply to provide sufficient power to run them so a Peek Value PS needs to have lots of Reserves to run these reliably
The Constant Power Type Power Supply can run at it's max ratting all day every day for ever or at least till the mains fails without a problem. Tis is the type of PS that NVidia work on when they provide Recommended Power Ratings.
So if you have a Constant Rating PS you do not need to change your PS but if you have one rated to Peek Values you will need to change it to either one rated to a Constant Draw or a higher Value one that is rated to a Peek Value.
If your PS is a brand name like Antec it will do what is required but if it is a No Brand Name like Flower it is one of the Peek Types and will need to be replaced.
If the PS can not supply the necessary current here the Computer will fail and most likely destroy most of the components inside the case when it fails as well. Though you could be lucky and just the PS dies or you could be incredibly unlucky and when the OPS dies and goes to Silicon Heaven it allows mains voltage into the insides of the case and totally destroys everything connected to the computer.
Col