Discussion Locked

Antivirus bootable floppy?

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I'm trying to fix a friend's laptop that won't load past the Windows ME splash screen on startup. I made a bootable diskette and used scandisk (it detected no errors) and scanreg /all. Neither of these fixed the problem. I'm convinced that there's a virus in the boot sector (what else could it be?) and have been searching on the internet for a way to download an antivirus program to boot from a floppy disk. Does anybody out there know where I can find this? Any help would be greatly appreciated.

13 replies

by willcomp

Before you get too hung up on a virus, see if notebook will boot into safe mode. If it does, you likely have a driver problem or some other issue, not a virus.

There are several other things that wil cause Windows to stop while loading.

Dalton

by thechas

I agree with Dalton that a virus is not the first suspect.

A bad driver or software installation, or a missing system file is much more likely.

As to running anti-virus from a bootable floppy, it just is not practical anymore.
Just the virus definition files are too large to fit on a floppy, let alone the detection engine.

You can boot from a Norton anti-virus CD (and I believe McAfee) and run a virus scan from the CD.
You just won't have the latest virus definitions.

One other option would be The Ultimate Boot CD:

http://www.ultimatebootcd.com/

This CD boots up with a number of utilities.

Or, if you are convinced that the system has a virus, you can mount the hard drive as a slave in a desktop PC and scan the drive with your anti-virus software.
You can get an adapter that allows you to install a 2.5" laptop drive in most desktops PCs for under $10 (US).

Chas

by rewrite

I agree with the first 2 answers but if you do want to check for a virus from dos you can get the f-prot dos scanner for free from:

http://www.f-prot.com/products/home_use/dos/

I always keep an updated copy in my bag for dos scans.

Also, if you think it's an mbr problem you can run "fdisk /mbr" to rewrite the mbr and repair any problems.

Cheers.

RW

by razz2

I agree with the othersthat it is most likely not a virus. I would start with any ecent changes to the PC as a guide and if there were no changes then look at drivers or another startup app.

I don't think an MBR issue is it though or you would not be getting to the OS screen.

As far as scanning for virus' from a boot drive... Well floopies are out with 4-5 meg definitions. I find the McAfee download the easiest to update on a cd. Download the McAfee SDAT file to a folder on the desktop from here:

http://www.mcafeesecurity.com/us/downloads/updates/superdat_download.asp

Then use the run command in windows to run the SDAT with the /e switch. /e stands for extract. Copy that directory to the CD (minus the original SDAT)and after booting to the cd change to the folder and run:

scan /adl /clean /all

OR
scanpm /adl /clean /all

SCAN.EXE VirusScan command-line scanner for
32-bit environments
SCANPM.EXE VirusScan command-line scanner for
protected-mode environments

There are a ton of switches for scan and scanpm so do a scan /? or scanpm /? at the DOS prompt.

Good Luck,

razz

by granogue

I downloaded F-Prot but the file is 3+ mb--it's too large to fit on a floppy. Regarding booting into safe mode I forgot to mention that I've tried that and it still doesn't load past the Windows ME splash screen.

by granogue

I downloaded the stinger program on my floppy disk. When I start the defective computer up an a: prompt appears. I don't know what command to give it to get it to star5t scanning the system. Any thoughts?

by hereinoz

Have you performed a step by step installation, loading the OS bit by bit? If you haven't, it is possibly worth doing to find out exactly what is taking it out.

You access that from the same screen as Safe Mode.

Alan

by wcp

I?d like to offer a few options.

1. Install F-Prot Antivirus for DOS, which is free.
This requires downloading the program from a working computer and updating the virus definition with the latest one. Burn the whole thing to a CD. Boot the IBM NB with a Windows 98 Startup disk and run the program (f-prot.exe) from the CD.
http://www.f-prot.com/

2. Boot to Safe Mode.
You can run Stinger from Safe Mode. Copy Stinger from the diskette to Desktop and run from there. If this does not resolve the problem, do System Restore to a date when everything seemed working.

3. Boot to Safe Mode with Command Prompt Only.
You cannot run Stinger from this mode. The best you can do from this mode is to run System Restore.
Refer to MS KB Article 279736 ?How to Start the System Restore Tool from a Command Prompt ?or http://tinyurl.com/d34g

4. Reinstall Windows.
If the NB came with a Restore (or Recovery) CD, read the instruction very carefully. Some NBs allow you to reinstall Windows without affecting your current programs and data.

5. If the above did not resolve your problem, you may have hardware (HW) problem.

6. Clean install Windows.
This is the last resort. Backup as much data as you can and clean install Windows using recovery CD. This, of course, assumes your HW are fine.

by ben "iron" damper

Also, if the machine is running McAfee AV it has been known to hang during boot up at the splash screen in both WIN ME and WIN98. Go into safe mode (if your running McAfee) and un-install McAfee. If the machine then boots up fine after that then simply re-install the AV software. We've had this happen with multiple ME/98 machines here at work with v. 4.03 and 4.51 McAfee and this solution has resolved 100% of those.

This discussion is closed to new replies.