[Archives] PC100 BXcel HT1543

Clarifications

Reposted under correct user account.

But it is a PC Chips M'Board. PC Chips like Solteck is no more so there is very little information available. However unlike Soltech they where not a good M'Board if they worked for a year they tended to continue working but many failed to work for even a year reliably.

These where a Basic Cheepie M'Board that used common Chip Set's. You may have some joy by looking for similar Chip Set M'Boards from the Bigger M'Board makers as the PC Chips M'Boards where nothing special. They did however have fairly decent Screen Printing on the Boards so it may be possible to replace the Jumpers just by reading the M'Board as it may tell what should go where.

Failing that post back with the CPU Type and the M'Board Chip Set and I'll see what I can come up with.

Unless I'm just reading this wrong and you are asking how to replace the Front Panel Connections to the M'Board. These should be Silk Screened on the M'Board with the P Led, Speaker, HDD LED, Reset & Power Switches shown on the M'Board. The LED's are Polarized components so they need to go on to the colored lead to the Positive Connector which is always the Number 1 Connection.

The Power LED has a 3 Pin Connector but only uses the two outer pins, The Speaker uses a 4 Pin Connector and again should only use the two outer connections the remaining ones are all a 2 way connector.

Col

http://pcchipsusa.com/Manual/M726/M726v33.pdf

Keep us informed as to your progress if you require further assistance.

If you think that any of the posts that have been made by all TR Members, have solved or contributed to solving the problem, please Mark them as Helpful so that others may benefit from the outcome. ;) :D