Question Locked

Bandwidth monitor suggestions, please!

0 helpful
25 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Long story, but I'm beginning a battle with my ISP re our bandwidth connection at home.

They don't believe what I'm telling them, basically (well, they don't know me very well, do they.....?!) so they're very dismissive, and the worm has turned. I'm livid.

I'm looking for suggestions, please, on a bandwidth monitor that I can download to both the main pc in the house, and my laptop. I need to do this, so I can give them some sort of statistical report of any speeds/connections I can, to prove my point (any may be get compensation as well as refunds..... :) )

Yes, I'd love to change ISP's, but have limited choice unless I want to go for 3rd party provision, which has proved more than problematic for others in my area.

Not having had to monitor bandwidth before, I'm a bit stuck. I know there are zillions of programs out there that do this type of thing, but I'm looking for personal recommendations from previous users (besides that, I tend to trust you lot more than just hitting Google...! :p )

Keep remembering how un-technical I am, guys, and treat me gently, please!

thanks in advance, peeps - any help to sort this out greatly appreciated; I need to help Steffi with her dissertation this Easter... :(

GG

25 replies

by older mycroft

Speedtest.net.

http://www.speedtest.net/

It's quick(ish - depending on your bandwidth!) and it's clever 'coz you can check your bandwidth from lots of different nodes in your own locale or around the world. ;)

by tig2

Firebug and Yslow are a pair of Firefox plugins that will
tell you if the issue is a particular page load. They are
both reasonably well documented and fairly easy to use.

The reason to take this additional step is that the issue
may truly not be bandwidth but poorly constructed pages.

Either way, the results of these tools may help you to
prove that the issue is on their end.

Peer me if you run into problems. Just keep in mind that I
will be out of pocket from Friday morning until Saturday
afternoon. We have to go up north tomorrow.

Keep in mind that when you are talking to your ISP, if you
aren't talking to someone at a Supervisor level or higher,
you are talking to the wind.

by gadgetgirl

got sick of it crashing and dying on me.

Currently on Opera, and not totally happy with that, either. Has some good bits and bad bits (as do they all) but once this bandwidth issue is resolved I'll be trying more browsers, I think.

What I need to do is prove definitively and statistically that we're not on the link that they say we are; the one they've been charging me for the past three years - - -

What I'm looking for is something that I can send to them attached to the complaints form (which can only go electronically[i] so I'm stuffed on how much I can send them down that bandwidth anyway..... [/i]

Every had the feeling you were disappearing up your own tailpipe..... :_|

GG

oh, but keep an eye on Skype/SS - if it sorts *itself* out over Easter, I'll be there......

by tig2

Try Safari for Windows. I use it on the Mac and like it as
much as Firefox. For many things I use it exclusively.

I'm only using SightSpeed these days. You are absolutely
right- it is better than Skype.

I'll keep an eye open on Easter. We have brunch with the
family in the morning but nothing else planned. I figure
I'll hear from Steffi for anything else she needs after you
two have talked. I can create podcasts on the Mac so will
just hunt up what material she wants and send her an
MP3.

Try and find a human at your ISP that you can send stuff
to directly. It may help.

by gadgetgirl

I'd just like it in the first place....

]:)

(or the second.... ;\ or the third ....... :) or the fourth ..... :p ....... or the fifth ...... :D or the sixth ..... ;) need I go on? :^0 )

:x

GG

by jdclyde

yes, please. do go on and on and on..... ]:)

A night playing energizer bunny might be fun! ;\

[i]~scurries off to get crate of viagra and an oxygen tank....~[/i]

:x

by gadgetgirl

no, not for Roger Rabbit....

for YOU!

:x

GG

<1st Muttleyfit of the year>

You owe me monitor wipes!

by jdclyde

Oh, now we are talking lethal combinations....

Put your right foot forward
Put your left foot out
Do the Bunny Hop
Hop, hop, hop!

[i]~one crate of monitor wipes on the way~

by ontheropes

I'd use Gadwin PrintScreen to send pix of the results. You can get it here: http://www.gadwin.com/printscreen/

I have mine set-up to capture a user defined window. I think the default is to capture the entire desktop. You'll have to tinker with it for a few minutes to get the default directories and file names set-up the way you want them but GPS works well for me. Mine is set to run at startup. It saves a lot of typing from time to time.

by jdclyde

[ALT] + [print scrn] gives you your print screen.

I have my users trained to do this, and then paste the capture in an email instead of calling me about an error message that they get.

by tig2

Has better functionality than Windows Print Screen. I found it
more flexible. Give it a test run. You don't have to re-train
your users either- They can use Gadwin through the same
method they use to print screen in Windows.

And I think that Gadwin works in *nix.

by ontheropes

For instance, I can do this.

I like the ability to be specific instead of copying the entire desktop. I suppose it comes down to personal preference and usage of captured shots.

by older mycroft

I've seen this quite a lot lately.

Modern keyboards tend to have duplicitous functions on a single key - difficult to figure out the wrist-contorting sequence required.

by jdclyde

pasting into paint and cropping out what I don't want and so just developed a blind spot.

by ontheropes

Of course there is other screen capture software but I've had GPS for years without having any issues so it's the one I recommend.

by jdclyde

"Can't say if it is the best, but it works for me"

by dumphrey

IPCop box in place of your router for the time being will give you access to a squid proxy and the resultant monitoring and reporting. It can track total bandwidth through an interface over a period of time. If they are capping you, you can turn on speedtest (as previously mentioned) or just download a ton o files, and register the bandwidth used.
A little more effort then some of the other solutions, but a spare IPCop box laying around has a ton o uses.

by gadgetgirl

even if I don't have a clue what you just posted, Dumphrey!

Remember, dear, this is me. What the aitch a nipcop box is, I haven't a clue...

No, I'm not blond! Just not technical!

What I'm trying to prove (I think; I now have myself confused this problem has had me irate all day) is the amount of bandwidth they tell me I'm getting (and I'm not) and the speed at which I'm getting it (snails pace: at one stage last night, a 56k modem woulda bin faster..... :( )

If I need clarification of ^^^, you'll find out - no doubt in a hurry, via pm! :^0

thanks again, Dumff. :x

GG

by dumphrey

http://ipcop.org/

IPCop is a bsd based distro thats designed to act as a router/firewall/web proxy. It can do virus scanning (via clamav) of incoming web data etc. A very useful download that runs like a charm on nearly any old computer with two net cards.

The ONLy really difficult part to the set up is deciding which card is the Red or Green interface (unless they happen to be different vendors, and you know which is which). After that its all a web page set up and management. I have one here at work in case our PIX decides to die, and one at home in case my router dies. I had these old computers sitting around...

by ontheropes

Had to ask. I know that whenever I'm in violation things run at a snails pace.

by jdclyde

Easy to setup?

Easy to read?

Can it tell total bandwidth?

Can it break down usage by protocol?

Can it break down usage by user/IP address?

Will it work as a sniffer plugged into a network, or does it HAVE to be in-line?

How long have you been using it?

I have tried wireshark (ethereal) but haven't figured out how to get usable/readable reports out of it.

My MAIN goal is to look for systems that are pulling excessive usage or suspect activity, to help watch for either bad hardware, virus infections, or users doing something that would interfere with the legitimate needs of our network.

Feel like starting a discussion on this?

This discussion is closed to new replies.