Question Locked

beeping noise

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

This just happened today. I pressed the power button to try and start my computer. But then a long beep occurred about 5 seconds long and the screen was black,nothing came up. The beeping kept happening at about 1-2 seconds in between the other. I don't know what to do.
please help me !

9 replies

by older mycroft

Figure out what motherboard is inside your computer.

Once you know, use Google to check what the Beep-Error means.

Simple :)

by dragos_134

I've been googling like mad but havent found anything
I'm not very tech saavy :(
my board is the EVGA nForce 680i SLI.
If you can find me a link or something like that,i would greatly appreciate it.

by l-mo

I believe you should be looking on the BIOS makers website for the "Beep Code".

Regardless, I wonder how much you should mess with the BIOS and/or hardware since you say, "I'm not very tech saavy :( ". You may be better off having a tech look at it.

Good luck! :)

by older mycroft

YOU were the first to mention the BIOS!

All I suggested was attempting to interpret the beep codes.

Sheesh!

by Former member

COMPUTER SYSTEM BEEP CODES

Beep Code:
Description of Problem:

No Beeps
Short, No power, Bad CPU/MB, Loose Peripherals

One Beep
Everything is normal and Computer POSTed fine

Two Beeps
POST/CMOS Error

One Long Beep, One Short Beep
Motherboard Problem

One Long Beep, Two Short Beeps
Video Problem

One Long Beep, Three Short Beeps
Video Problem

Three Long Beeps
Keyboard Error

Repeated Long Beeps
Memory Error

Continuous Hi-Lo Beeps
CPU Overheating

Please post back if you have any more problems or questions.

by Former member

Open your case and make sure the fan is spinning around on top of the heatsink. What you need to do anyway is to remove the heatsink and fan and then the processor, give the processor a good clean (wipe the paste off), put your processor back in and then put on a very small amount(and i mean small)of thermal paste and spread this very evenly over the top of your processor, then replace the heatsink and fan very carefully and clip/screw it done. then restart your computer and see if there are any errors.

Please post back if you have any more problems or questions.

by dragos_134

figured out the problem,one of my ram sticks is bad,so i will buy a new one when i have the time,thanks a lot for your help ^_^

This discussion is closed to new replies.