Desktop

Ask something
Question Locked

BELKIN Wireless G Router [S:6002] Problem

0 helpful
3 replies

by chrislord2010

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Gateway Computer with a Intel(R) PRO/100 VE NIC. When I connect my BELKIN Wirless G Router (2.4GHz-802.11g)I lose my interent connection. When I disconnect my Belkin Wireless G Router and connect my Cable router directly to my PC, I get a connection. Can Anyone help me with this problem. ASAP Please.

Edit:
The Cable Modem is connected into the router. Then The PC is connected into the Back of the Router. That is when the problem accures.

3 replies

by seanferd

Connect the router between the cable modem and computer, and run the router setup.

If there are further problems, tell us where the connection fails: The wireless from computer to router? Internet from cable modem to router? Etc.

by johnjayanth.balantrapu

- Take a paper clip and push the reset button a little harder for 45 secs and then unplug the power and plug it back
- Connect the Cable modem to the WAN/Internet/Modem port of the router
- Connect PC to one of the four LAN ports
- Check the ip address of the computer 192.168.2.XX and Default Gateway be 192.168.2.1
- To check the ip >Start>Run>type in CMD > in the black window just type in IPCONFIG and hit enter
- Open the bowser, clear the address bar and put only 192.168.2.1 and enter
- You will be able to see the manual settings page of router
- Login with password as blank and on left pannel you will have "connection type" click on it and select the dynamic option and click next at bottom and click "clone MAC address" and no host name and apply
- Minimize another browser and check you will be able to go online
- Connect to the wireless network and will work

This discussion is closed to new replies.